Filling The Vat; Printing - G3D T-1000 Manual

PRINTING WITH T-1000

FILLING THE VAT

Shake the resin bottle before each use.
Never overfill the vat past max line to avoid overflow and spill of resin
inside the printer.
1. Pour resin into the vat before starting to print.

PRINTING

The projector is set to a default XY resolution of 175 microns. If you will print
a file with a different XY resolution, change the XY resolution setting of the
projector and adjust the focus of the projector. The XY resolution of the
projector should always match the XY resolution of the file.
See "Adjusting the XY resolution of the projector" on page 37.
See "Focusing the projector" on page 41.
1. Press <
SAFETY PRECAUTIONS
Do not stare at the UV light for prolonged period of time, it is equivalent
to staring at the sun which can cause sunburn on your eyeball.
The door window is UV protected. It should be closed during normal
operations.
T-1000
MAX
> button to print.
MIN
35