Resetting The Switch To Factory Defaults - Lenovo EN4023 User Manual

2
Managing the switch
3. Copy the configuration to the start-up configuration.
It is recommended that you back up the configuration on a regular basis to ensure that a complete
configuration is available for downloading to a replacement switch.
For specific instructions about how to back up a configuration, refer to the Network OS
Administrator's Guide. For detailed information about the commands used in backing up a
configuration, refer to the Network OS Command Reference.

Resetting the switch to factory defaults

ATTENTION
Restoring the switch to factory defaults is disruptive. Before doing so, save the switch configuration.
Use the Lenovo Chassis Management Module (CMM) to reset the switch to factory defaults. See
Figure
1. Open the CMM and log in with admin privileges.
2. Select Chassis Management > I/O Modules.
3. Select the bay where the switch is installed.
4. Click the Actions tab.
5. Click Reset Factory Defaults.
FIGURE 21
34
EN4023# copy running-config startup-config
This operation will modify your startup configuration. Do you want to
continue? [y/n]:y
EN4023#
21.
Resetting factory default settings from the CMM GUI
Lenovo Flex System EN4023 10Gb Scalable Switch User's Guide