Viewing Firmware Version; Resetting To Factory Defaults - Lenovo ThinkSystem SM27A17643 User Manual

Chapter 4: Using the On-Screen Display Interface

Viewing Firmware Version

Resetting to Factory Defaults

You can check the current versions of OSD and USB driver implemented
on the SM27A17643 switch.
To view the current firmware version:
1. If the OSD is not displayed, press the hot key 3 times.

The default hot key is 'Scroll Lock.' To change it, see
Settings
(on page 21).
2. On the Selection Menu, press F5. The firmware information displays.
3. To exit, press Esc.
You may clear current system settings and have all settings return to
factory defaults. These settings include:

All settings on the SETUP page.

All user accounts on the User Configuration page.
Restoring factory defaults does NOT require the administrator
permission.
Exception: Channel names are stored on the connected SC17A30048
cables so they are NOT reset to factory defaults.
To reset system settings:
1. Log out to show the Login screen. See
2. Press Ctrl + Shift + F10. The following message appears.
3. Press Enter to proceed with the factory reset. The following message
appears.
26
System
Logout
(on page 12).