Table of Contents
Advertisement
FIGURE 18
For IPv6
1. Install the Lenovo Flex System EN4023 10Gb Scalable Switch in the appropriate bay of the
2. Log in to the CMM using the following default user name and password settings:
3. From the CMM GUI, navigate to Chassis Management > Component IP Configuration.
4. Select the I/O Module bay in which the switch is installed. The example in
5. Select the IPv6 tab.
6. Complete the text fields as required, then click Apply.
7.
Introduction
Component IP Configuration page
Lenovo Flex System chassis. For more information, see
User ID: USERID
Password: PASSW0RD (wherein the sixth character is a zero)
"IO Module 3."
The IP Address Configuration IO Module (for the selected bay) dialog box displays.
Click Close to close the dialog box.
Configuring the switch
"Installing the switch"
on page 10.
Figure 19
2
is using
29
Advertisement
Table of Contents
