FIGURE 9
To disconnect the USB console cable, grasp the connector and gently pull the cable from the
switch.
Connecting the RJ-45 Ethernet cable
The RJ-45 Ethernet cable can be connected to the RJ-45 port located on the front panel.
To connect the RJ-45 connector to the switch, push the connector into the port connector until it
clicks into place, as shown in
FIGURE 10
To disconnect the RJ-45 Ethernet cable, grasp the connector and gently pull the cable from the
switch.
Introduction
Mini-USB connection
Figure
10.
RJ-45 Ethernet connection
Cabling the switch
2
19