Table of Contents
Advertisement
2
Locating the information panel, LEDs, and external ports
1
FIGURE 14
Table 6
TABLE 6
Status LED
Ethernet Link LED (green)
Ethernet Tx/Rx LED (green)
System status LEDs
Three system LEDs are located at the bottom of the front panel that identify system status, as
shown in
During power-on self-test (POST), the switch performs internal tests and LED tests. During POST,
the LEDs are lit intermittently. After POST is successfully completed, the LEDs will behave as
described in
24
Tx/Rx LED
RJ-45 Ethernet port LEDs
identifies the Ethernet port status LEDs.
RJ-45 Ethernet port status LEDs
Figure
15.
Table 7
and
Table
2
Link LED
Description
No light. There is no link.
Steady green. There is a link.
Flashing green. There is link activity.
No light. Port speed is 10 Mbps.
Steady green. Port speed is 100/1000 Mbps.
8.
Lenovo Flex System EN4023 10Gb Scalable Switch User's Guide
Advertisement
Table of Contents
