The Rj-45 Management Port - Lenovo SI4093 User Manual

Disconnecting the Serial Console Cable

The RJ-45 Management Port

Connecting RJ-45 Cables
Disconnecting RJ-45 Cables
24
SI4093 System Interconnect Module User's Guide
For additional information, see
Interface" on page 42.
To disconnect the serial console cable, grasp the connector and gently pull the cable
from the switch.
RJ-45 cables can be connected to the to external management port, and also to SFP+
ports that have legacy 1000BASE-T SFP transceiver modules.
To connect the RJ-45 connector to the switch, push the RJ-45 cable connector into
the port connector until it clicks into place.
To disconnect the RJ-45 cable, squeeze the release tab and gently pull the cable
connector out of the switch connector.
"Accessing the Switch Through the Serial-Port