User Functions; Installer Modes - First Alert FA848C Installation And Setup Manual

6XPPDU\RI.H\SDG)XQFWLRQV
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •

User Functions

ARMING/DISARMING:
STAY ARMING:
INSTANT ARMING:
STAY/ INSTANT ARMING:
BYPASS/UNBYPASS:
MULTIPLE BYPASS:
QUICK BYPASS:
USER CODE PROGRAMMING:
USER PART/PAGER ASSIGN:
USER CODE DELETION:
CHANGE PARTITION:
QUICK ARM:
QUICK FORCED ARM:
SET TIME:
DISPLAY ZONE DIR.:
SET AUTO ARM TIME:
DISPLAY/TOGGLE TIME:
DISPLAY TIME:
DISPLAY AUTO ARM TIME:
DOOR STRIKE:
USER ON-LINE DOWNLOAD:
PANIC:
FIRE:
AUXILIARY:
AMBUSH:
NOTES:
• User codes can be 4 or 6 digits, depending on system programming (Question 17, L3).
• Zone numbers hour/minute, day/year, and trigger numbers require 2-digit entries.

Installer Modes

KEYPAD PROGRAMMING:
SYSTEM DEFAULT:
DEFAULT USER CODES:
PROGRAM REVIEW MODE:
WALK TEST
SYSTEM LOG VIEW:
SYSTEM DEFAULT:
CLEAR TAMPERS:
DEFAULT USER CODES:
UNATTENDED DOWNLOAD:
ON-LINE DOWNLOAD:
NOTES:
•. Installer code can be 4 or 6 digits, depending on system programming (Question 17, L3).
• Pressing [∗] exits installer mode. The system will also automatically exit Installer mode
if no keys are pressed for a period of time.
[user code]
[STAY] [user code]
[INSTANT] [user code]
[STAY] [INSTANT] [user code]
[BYPASS] [user code] [zone number]
[BYPASS] [user code] [zone no.] [BYPASS] [zone no.], etc.
[BYPASS] [zone number]
[CODE] [master user code] [user #] [new user code] [auth lev]
[#7] [master code] [user no.] [1, 2, 3, or 4 (pager)]
[CODE] [master user code] [user no.] [ ]
# 0 [code] [0,1-3,9]
[#] [1]
[#] [2]
[#] [3] [user code] [Hour] [Minute] [Day] [Year]
[#] [4] (LCD Keypads only)
[#] [54] [user code] [Hour] [Minute]
[#] [6]
[#] [51] (LCD Keypads only)
[#] [52] (LCD Keypads only)
[#] [57] [code] [Trigger number]
[#] [9]
[#] & [ ] at the same time
[7] & [9] at the same time
[1] & [3] at the same time
[Enter user code 60-64, if programmed]
[CODE] [ ] [installer code] [1] [1-4 submode]
[CODE] [ ] [installer code] [1] [1-4 submode] then press
[1] & [3] at the same time
[CODE] [ ] [installer code] [1] [1-4 submode] then press
[7] & [9] at the same time
[CODE] [ ] [installer code] [2]
[CODE] [ ] [installer code] [3]
[CODE] [ ] [installer code] [4]
[CODE] [ ] [installer code] [5]
[CODE] [ ] [installer code] [6]
[CODE] [ ] [installer code] [7]
[CODE] [ ] [installer code] [8]
[CODE] [ ] [installer code] [9]
S E C T I O N 7
7-1