First Alert FA848C Installation And Setup Manual page 49

Disable Arming: If selected, the respective partition cannot be armed. See Question 84,
L1/L2 for entering a report code that is sent if a user attempts to arm the system after this
option has been set.
Exit Extends: If selected, reentering the premises during the exit delay time will restart
the exit delay timer, allowing someone to exit again without having to disarm, then rearm
the system. This can only occur once during an armed period. See Question 19, L4 for
related Quick Exit feature.
Enter the L4 digit from the table below.
Q 19, L4
L4
Entry Quick Arm
0
1
2
3
4
5
6
7
8
9
A
B
C
D
E
F
Quick Arm: If selected, Quick Command #1 will arm if the partition is ready.
Force Arm: If selected, Quick Command #2 will arm the system and bypass any faulted zones.
Quick Exit: Allows the user to leave the premises while the system is armed by pressing
the STAY key, which restarts the exit delay timer. This way the user does not have to first
disarm the system, then re-arm it again to leave.
Quick Bypass: Allows the user to bypass zones without first using the user code.
Q 20 SOUND OPTIONS
This question defines sounder and bell options.
Enter the L1 digit from the table below. Applies only to wireless keys.
Q 20, L1
L1 FOB/keysw.
Entry
0
2
3
4
5
6
7
8
A
B
C
D
E
F
Force Arm
Arm Bell
Ding Ding
Quick Exit Quick Bypass
Disarm Ding Fast Ding
L1 L2 L3 L4
6-17