First Alert FA848C Installation And Setup Manual page 59

For L2 and L4 make selections from the table below (Q31, L2 = 1 & 3 keys; Q31, L4 = 7 &
9 keys; Q32, L2 = * & # keys).
L2/L4
Entry Arm Away
0
1
2
3
4
5
6
7
Arm Away/Stay: Selects the arming mode that the designated soft key will activate.
Pager/Audio Tone Alert: If selected, a message will be sent to the pager/audio tone phone
number when the designated soft key is pressed. This can be used to send a "help me"
message. The message is sent to the pager number for the partition in which the initiating
keypad is mapped.
Q 31 SOFT KEY FUNCTIONS FOR [1] & [3]/[7] & [9]
Q 32 SOFT KEY FUNCTIONS FOR [*] & [#]
Q 33, AUTO ARM ENABLES
L1-L3
This question enables auto arming for each partition (L1-L3). See Questions 34-36 for
setting the auto-arm times for each partition. Enter the L1-L3 digits as follows:
L1-L3
Entry Auto Arm
0
1
3
5
7
9
B
D
F
Auto Arm: Arms the system in AWAY mode at time specified in Questions 34-36 for
partitions 1-3, respectively.
Audible Arm Warning: If enabled, allows an audible sound and/or bell (Question 20, L2)
to warn of auto-arming. If enabled, sound begins 30 seconds before arming. See Question 20,
L2 for more information.
Instant Auto Arming: Arms the system with entry delay disabled.
Stay Auto Arming: Arms the system in STAY mode.
Arm Stay Pager Alert
Audible Arm Instant
Warning Arming
L1 L2
1&3 Keys
L1 L2
∗
& # Keys
L1 L2
part. 1 part. 2
Stay Arming
L3 L4
7&9 Keys
N/A N/A
L3 L4
L3 L4
part. 3 Up/About
6-27