Table of Contents
Advertisement
NOTE: Fast Blink = approx. 150mS ON - 150mS OFF
Upon entry, the keypad sounder annunciates to warn the user to disarm the system. In addition,
the respective zone LED(s) are ON to indicate which zones are violated (e.g., entry door and
motion detector).
ARM/DISARM LED (all keypads)
This LED/display indicates that the system is currently armed (ON) or disarmed (OFF).
ON:
OFF:
Fast Blink:
Slow Blink: Unable to communicate with central station (communication failure)
STAY LED
This LED/display indicates that the system has been armed in the STAY, STAY/INSTANT,
or AUTOSTAY mode. STAY/INSTANT is enabled in programming question 19 location 1.
The STAY LED indicates the following:
ON:
OFF:
Slow Blink: Cross partition mode
INSTANT LED
This LED/display indicates that the system has been armed in the INSTANT or
STAY/INSTANT mode, meaning that the system is currently armed, all delay zones are
instant (no entry delay time).
ON:
OFF:
Slow Blink: Common partition alarm canceled
See programming Question 19, Location 1 for various Instant arming options.
BAT LED
This LED/display indicates the current power status of the panel as follows:
OFF:
ON:
Slow Blink: Low-system battery condition detected if no zone LED lit;
Fast Blink:
READY LED
This LED/display indicates that the system is ready for arming. The READY LED is
common to all BURGLARY ZONES, with the following indications:
ON:
OFF:
Slow Blink: Installer Programming Mode
Fast Blink:
SUPR LED
This LED/display indicates a supervisory condition as follows:
ON:
OFF:
Slow Blink: Bell supervisory condition exists
Flash:
TAMPER LED
This LED/display indicates a tamper or phone fail condition as follows:
OFF:
Slow Blink: Phone line failure
Fast Blink:
5-2
Slow Blink = approx. 600mS ON - 600mS OFF
Flash = approx. 100mS ON - 900mS OFF
System armed
System disarmed
Alarm mode (alarms have occurred)
Interior zones are bypassed
Interior zones are normal
Delay zones are currently instant
Delay zones are normal
AC is present
No AC, running on battery backup
if zone LED also lit, low battery on that zone
Keyfob low battery
System ready to be armed
System not ready to be armed
Alarm Memory Mode
Supervisory condition exists
No supervisory conditions present
Keypad is in standby mode
No tamper conditions present
Tamper condition present on a zone
Advertisement
Table of Contents
