Using The Optional Rc-V100 Remote Controller - Canon XF400 Instruction Manual

Using the Optional RC-V100 Remote Controller

You can connect the optional RC-V100 Remote Controller to the camcorder's REMOTE terminal in order to
control the camcorder (including advanced recording functions) from a distance. The remote controller lets you
turn the camcorder on, navigate the menus and remotely control the aperture and shutter speed, and more.
Use the cable supplied with the remote controller to connect it to the camcorder. For details on how to connect
and use the remote controller, refer to its instruction manual.
Operating modes:
1 Turn off the camcorder and connect the optional RC-V100 Remote Controller to the camcorder.
2 Turn on the camcorder and select [REMOTE Terminal].
> [B " System Setup] > [REMOTE Terminal]
3 Touch [ RC-V100 (REMOTE A)] and then touch [X].
Options
[ RC-V100 (REMOTE A)]:
Select this option to use the optional RC-V100 Remote Controller.
[ Standard]: Select this option to use commercially available remote controls.
NOTES NOTES
• The following controls on the remote controller will not operate the camcorder:
- CUSTOM PICT. button
- AGC button
- AUTO KNEE button
- KNEE POINT, KNEE SLOPE dials
- BLACK GAMMA LEVEL dial
- SHARPNESS LEVEL dial
Using the Optional RC-V100 Remote Controller
Remote cable
(supplied with the RC-V100)
- WHITE BALANCE R and B dials
- MASTER BLACK R and B dials
- MASTER PEDESTAL dial
- AUTO IRIS button
- CANCEL button
To the RC-V100's
REMOTE A terminal
89