Adjusting The Volume; Displaying Clip Information - Canon XF400 Instruction Manual

4k camcorder
Hide thumbs Also See for XF400:
Table of Contents

Advertisement

Basic Playback
NOTES
• During fast/slow playback, you may notice some anomalies (blocky video artifacts, banding, etc.) in the
playback picture.
100
• The speed indicated on the screen is approximate.
• Slow reverse playback will look the same as continuous frame reverse.

Adjusting the volume

During playback, audio will be output from the monaural built-in speaker. You can connect a pair of headphones
to the × (headphone) terminal to listen to the audio in stereo.
1 During playback, touch the screen to display the playback controls.
2 Touch [Ó/ ].
3 Touch [Ø]/[Ô] or [Ù]/[Õ] to adjust the volume and then touch [K].
• You can also drag your finger along the respective volume bar.
NOTES
• You can select the audio channels output from the × (headphone) terminal and built-in speaker (A 110).

Displaying Clip Information

1 In the clip index screen touch [I] and then touch the desired clip.
• The [Clip Info] screen will be displayed.
• Touch [Ï] / [Ð] to view the information for the previous/next clip.
2 Touch [L] twice to return to the index screen.
1 File number (A 137)
2 Display the information for the previous/next clip
3 Clip number / Total number of clips
4 Slow & fast motion rate (A 48)
5 Look (A 73)
6 Date and time at the start of recording
* Only when the optional GP-E2 GPS receiver was used when recording the clip.
1
2
3
4
5
6
7
8
9
10
7 Clip duration
8 Frame rate (A 46)
9 Resolution and bit rate (A 46)
10 GPS information* (A 90)
(location at the start of recording)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xf405Xf4005

Table of Contents