Canon XF400 Instruction Manual page 140

Menu Options
Menu item
[Onscreen Assignable Button]
[CUSTOM Dial & Button]
140
[Battery Info]
[Backup Menu Settings 7]
[GPS Auto Time Setting]*
[GPS Information Display]*
[Certification Logo Display]
[Firmware]
[Reset All]
* Option available only when the optional GP-E2 GPS Receiver is attached to the camcorder.
Setting options and additional information
For a complete list of the functions that can be assigned, refer to the detailed table
(default: [ Photo]).
[ Tv/Av/M], [ AGC Limit], [y Exposure Comp.], [j Off]
—
When you are using a battery pack that is compatible with Intelligent System, this option displays a
screen where you can verify the battery charge (as a percentage) and the remaining recording time
( mode) or playback time (
• If the battery pack is exhausted, the battery information may not be displayed.
[Save], [Load]
[i Auto Update], [j Disable]
—
When the optional GP-E2 GPS Receiver is attached to the camcorder, the following settings become
available:
[GPS Auto Time Setting]: You can have the camcorder automatically set the time based on the
information acquired from GPS. For more details, refer to Setting Time from GPS on the Camera
in the receiver's instruction manual.
[GPS Information Display]: Displays the current GPS information. For more details, refer to Viewing
GPS Information in the receiver's instruction manual.
—
Displays certification logos that apply to this camcorder.
• This option may not be available depending on the country/region of purchase.
—
Displays the current firmware version of the camcorder.
• This option is usually unavailable.
[No], [Yes]
Resets all the camcorder's settings to default values/settings.
mode).
(A 94)
(A 93)
(A 96)
(A 90)