Table of Contents
Advertisement
Menu item
[AF Response]
[Face Detection & Tracking]
[Focus Guide]
[Focus Preset Speed]
[Auto Backlight Correction]
[Auto Slow Shutter]
[Conversion Lens]
[Image Stabilizer]
[Powered IS Button]
[Set WB Priority]
[Focus Ring Direction]
[Focus Ring Response]
[Zoom Ring Direction]
[IR Light]
[IR Rec Color]
Setting options and additional information
[Z Fast], [[ Normal], [] Slow]
[i On }], [j Off]
[i On], [j Off]
[Z Fast], [[ Normal], [] Slow]
Determines the speed at which the focus changes to the preset position.
[i On], [j Off]
[i On], [j Off]
The camcorder automatically uses slow shutter speeds to obtain brighter recordings in places with
insufficient lighting.
• When this setting is set to [i On], the fastest shutter speed used is: 1/25 (50.00P) or 1/12
(25.00P).
• Auto slow shutter can be activated only during
or when infrared recording is activated.
• If a trailing afterimage appears, set the auto slow shutter to [j Off].
[¾ TL-U58], [¿ WA-U58], [j Off]
When you attach to the camcorder the optional TL-U58 Tele-converter or WA-U58 Wide Attachment,
set the appropriate conversion lens setting. The image stabilization method and minimum focusing
distance will change according to the accessory used. The minimum focusing distance throughout
the entire zoom range will be 130 cm for the tele-converter and about 60 cm for the wide
attachment.
• The tele-converter increases the focal length of the lens by a factor of approx. 1.5. The wide
attachment reduces the focal length of the lens by a factor of approx. 0.8.
• The approximate focusing distance displayed on the screen will change depending on the setting.
If you are not using an optional conversion lens, select [j Off].
• When a setting other than [j Off] is selected, the [v Camera Setup] > [AF Mode] setting will
not be available.
[® Off], [¯ Standard], [° Dynamic]
[Î Press and Hold], [Ï Toggle On/Off]
Determines the operation mode of the POWERED IS button (A 61).
[Î Press and Hold]: Powered IS will be activated while you hold the button pressed down.
[Ï Toggle On/Off]: Each press of the button will turn the Powered IS function on and off.
[
Automatic], [¼ Daylight], [É Tungsten], [
You can press an assignable button set to [Ä WB Priority] to switch between the current white
balance and the white balance setting selected for [Set WB Priority].
[h Normal], [X Reverse]
Changes the direction the focus/zoom ring needs to be turned when using it to adjust the focus (when
the focus/zoom ring switch is set to FOCUS).
[Z Fast], [[ Normal], [] Slow]
Selects the sensitivity of the response when operating the focus/zoom ring. This setting affects the
focus/zoom ring only when using it to adjust the focus (when the focus/zoom ring switch is set to
FOCUS).
[h Normal], [X Reverse]
Changes the direction the focus/zoom ring needs to be turned when using it to adjust the zoom (when
the focus/zoom ring switch is set to ZOOM).
[i On], [j Off]
[± White], [² Green]
Menu Options
mode, when the shooting mode is set to '
Color Temperature], [
Set 1], [
(A 54)
(A 54)
(A 50)
135
(A 50)
(A 68)
(A 61)
Set 2]
(A 88)
(A 88)
Advertisement
Table of Contents
