Using The Lens Hood And Lens Cap - Canon XF400 Instruction Manual

4k camcorder
Hide thumbs Also See for XF400:
Table of Contents

Advertisement

Using the Lens Hood and Lens Cap

While recording, the supplied lens hood with lens barrier is
effective for reducing stray light that can be the cause of lens
flare and ghost images. Additionally, closing the lens barrier
can help prevent fingerprints and dirt accumulation on the
lens.
To carry/transport the camcorder or store it after use,
remove the lens hood and place the lens cap back on the
camcorder.
1 Remove the lens cap.
• The lens cap and lens hood cannot be used
simultaneously.
2 Place the lens hood on the front of the lens so that
the groove on the lens hood is aligned with the top of
the lens ( ), and then turn the lens hood clockwise
until it stops with a click
• Be careful not to deform the lens hood.
• Make sure that the lens hood is aligned with the thread.
To remove the lens hood
1 Press and hold the lens hood release button and turn
the lens hood counterclockwise.
2 Place the lens cap back on the lens.
( )
.
Preparing the Camcorder
Lens hood release
button
23

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xf405Xf4005

Table of Contents