Recording; Recording Video And Photos; Preparing To Record - Canon XF400 Instruction Manual

4k camcorder
Hide thumbs Also See for XF400:
Table of Contents

Advertisement

3

Recording Video and Photos

This section explains the basics of recording clips* and photos. For details on recording audio, refer to Recording
Audio (A 77).
Before making important recordings for the first time, make test recordings using the video configuration(s) you
plan to use to check that the camcorder operates correctly. Should the camcorder fail to operate correctly, refer
to Troubleshooting (A 141).
* "Clip" refers to a single movie unit recorded with a single recording operation.
Operating modes:

Preparing to Record

1 Attach a charged battery pack to the camcorder (A 19).
2 Insert a card into an SD card slot.
• To use relay recording or dual recording (A 47), insert SD
cards into both slots.
3 Open the lens barrier.
• Set the lens barrier switch to OPEN.
4 If you need to use the viewfinder, pull it out and adjust it,
as necessary.
• You can use the dioptric adjustment lever and tilt the
viewfinder 45 degrees upward.

Recording

Lens barrier switch
39

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xf405Xf4005

Table of Contents