Table of Contents
Advertisement
Zooming
Digital Tele-Converter
Using the digital tele-converter, you can digitally increase the focal length of the camcorder by a factor of approx.
2 and record the enlarged image.
60
Operating modes:
1 Enable the use of the digital tele-converter function.
> [v ! Camera Setup] > [Digital Zoom] > [
2 Open the onscreen zoom controls.
[FUNC] > [R Zoom]
3 Touch [
] (digital tele-converter) and then touch [X].
• The center of the screen will be enlarged approximately 2 times and the
of the screen.
• Touch [
] again (before closing the screen) to turn off the digital tele-converter.
NOTES
NOTES
• You can attach the optional TL-U58 Tele-converter and use it in conjunction with this function to increase the
effect.
• The digital tele-converter cannot be activated while recording or when [v Camera Setup] > [Conversion
Lens] is set to [¿ WA-U58].
• The image is digitally processed so the image will deteriorate throughout the zoom range.
Digital Tele-conv.] > [X]
icon will appear at the lower left
Advertisement
Table of Contents
