Soft Zoom Control; Digital Tele-Converter - Canon VIXIA HF G40 Instruction Manual

Soft Zoom Control

Soft zoom control allows you to start and/or stop the zoom gradually.
1 Open the [Soft Zoom Control] screen.
> >
[FUNC.] [MENU]
2 Touch the desired option and then touch [
Options
( Default value)
[ j Off]
Use this setting if you do not intend to use soft zoom control.
[ ¬ Start]
Zoom starts gradually.
®
[ Stop] Zoom stops gradually.
¯
[ Start & Stop]
Zoom start and stops gradually.

Digital Tele-Converter

Using the digital tele-converter, you can digitally increase the focal length of the camcorder by a factor
of approx. 2 and record the enlarged image at full HD resolution.
Operating modes:
1 Open the [Digital Zoom] screen.
> >
[FUNC.] [MENU]
2 Touch [f Digital Tele-conv.] and then touch [X].
3 Open the zoom controls.
>
[FUNC.] [ZOOM]
4 Touch [f] (digital tele-converter) and then touch [X].
• The center of the screen will be enlarged approximately 2 times and the
f
• Touch [ ] again before closing the screen to deactivate the digital tele-converter.
NOTES
• You can attach the optional tele-converter and use it in conjunction with this function to increase the
effect.
• The digital tele-converter cannot be set while recording or when p
to [WA-H58].
• The image is digitally processed so the image will deteriorate throughout the zoom range.
p >
[Soft Zoom Control]
X
p >
[Digital Zoom]
].
>
Zooming
f
icon will appear.
[Conversion Lens] is set
59