Digital Tele-Converter - Canon XA60 Instruction Manual

Digital Tele-Converter

Using the digital tele-converter, you can digitally increase the focal length of the camcorder by a factor
of approx. 2 and record the enlarged image.
Operating modes:
1 Select [Digital Zoom].
> [v ! Camera Setup]
2 Select [ Digital Tele-conv.] and then select [X].
3 Open the zoom controls.
>
[FUNC] [R Zoom]
4 Select [ ] (digital tele-converter) and then select [X].
• The center of the screen will be enlarged approximately 2 times and the
• Select [ ] again before closing the screen to deactivate the digital tele-converter.
NOTES
• You can attach the optional tele-converter and use it in conjunction with this function to increase the
effect.
• The digital tele-converter cannot be set while recording or when
[Conversion Lens] is set to [¿ WA-H58].
• The image is digitally processed so the image will deteriorate throughout the zoom range.
• The digital tele-converter will be deactivated if the resolution is switched between 3840x2160 and
another one.
>
[Digital Zoom]
Zooming
icon will appear.
>
[v Camera Setup]
59
>