Onvif - Security Tronix ST-IP-TEST User Manual

3.3.3 ONVIF

The Open Network Video Interface Forum (ONVIF) app is used to connect to ONVIF compliant IP cameras only. If the IP
camera's video stream is MPEG4, use the ONVIF (SD) mode. If your IP camera's video stream is H.264, use ONVIF HD
(High Definition). (SecurityTronix IP cameras use ONVIF HD with H.264)
Click the icon to enter the ONVIF app. Then tap either the "ONVIF" icon is for SD mode (MPEG4) and the "ONVIF
HD" icon is for HD mode (H.264).
Once you select ONVIF SD or HD mode, the meter automatically scans different network segments for ONVIF cameras. It
lists the camera name and IP address on the Device List. If no cameras appear under the device list, try clicking on the
Refresh button.
If your IP camera does not appear after scanning the network, you can manually add an IP camera by clicking on the "Add"
button on the bottom left. The URL address should be identical to the ONVIF camera service address. (With your camera's
IP address entered into the URL). Click OK to add the manually entered camera and then click the "Refresh" button.
Page.17.