Security Tronix ST-IP-TEST User Manual page 2

Thank you for purchasing the SecurityTronix IP BUDDY+ Analog and IP camera monitor with network tester!
To use the IP BUDDY+ safely, please read the Safety Information carefully.
This manual should be kept with the IP BUDDY+ for reference.
Keep the serial number label for after-sale service within the warranty period. Please see the last page of the manual
for warranty information.
Batteries come disconnected to ensure they do not drain during shipment. Please connect the battery prior to
powering on the IP BUDDY+.
If you have any questions or problems while using the IP BUDDY+ camera tester, please contact our SecurityTronix
technical support department at 1-800-688-9282, option 3, then option 2.
Visit our website http://www.securitytronix.com for additional information.
DISCLAIMER: All applications and features of the IP Buddy+ are intended for use on your own networking equipment or with the written
permission from the owner of the equipment you are connecting to. You may not use the IP Buddy+ to access any IP cameras or any other
networking equipment that you are not authorized to access. This is illegal. Always check with your local, state and federal laws before
using the IP Buddy+. You may not use the password cracking tool for any IP Camera that you do not have expressed consent to try and
recover. This tool is made specifically for recovering passwords that you have forgotten or have permission to access. Always check the
camera's manual for default user names and passwords before trying to recover the password. SecurityTronix does not assume any liability
for loss of data or connecting to an unauthorized network device.