Security Tronix ST-IP-TEST User Manual page 24

Network settings: Click "Network Set" to change the IP address settings. NOTE: Some cameras are not fully ONVIF
compliant and cannot support changing their IP address, so there is no change after saving.
Snapshot：Click "snapshot" to save the current image as a JPEG file on the SD card.
Record：When you click the "Record" icon, video starts recording. A red recording icon appears on the screen and begins
to flash and a timer appears indicating the time elapsed for the video. Click on the "Stop" icon to stop recording and save
the video file to the SD card.
Set：Click on the "Set" icon to change Snapshot and Video recording file name settings. You can set Auto storage, which
sets filenames by time or set manual storage. Click "Sure" to save file name settings.
Page.20.