Super Administrator Setup; First Time Setup; Network Setup - Ip Address Determination - Tripp Lite B064-016-02-IP Owner's Manual

Super Administrator Setup

The B064-Series KVM Switches supports three types of users, as shown in the table below:
User Type Description
Super Administrators have full access to all Ports and Devices in the KVM installation. They can manage all aspects of the
Super Administrator
installation.
Administrators have access to Ports and Devices that are authorized by the Super Administrator. They can manage Users
Administrator
and Groups and configure their personal working environment.
Users can access Ports and Devices authorized by Super Administrators or Administrators and they can configure their
User
personal working environment.

First Time Setup

Once the B064-Series KVM Switch has been installed, the Super Administrator needs to set the unit up for user operation. This involves setting
the network parameters and adding users.

Network Setup - IP Address Determination

If you are an administrator logging in for the first time, you need to
access the B064-Series KVM Switch in order to give it an IP address
that users can connect to. There are four methods to choose from;
Local Console, IP Installer, AP Windows Client and Browser.
Local Console
After the local console has been connected and the B064-Series KVM
Switch is turned on, a login prompt appears on the console monitor:
Log in using the default Username: administrator and Password:
password. For security purposes, it is strongly recommended that you
change these to a unique Username and Password. (See Changing the
Super Administrator Login, page 14 for details.)
After you successfully log in, the Local Console Main Screen
appears:
1. Click the Device Management icon at the top of the screen.
2. On the notebook screen that appears on the right-hand side of the
page select the Network tab.
12