Dispensing correction factor (D1 to D13)
The correction factor can be used if an adjustment is made to liquid
dispensing. If, for example, the dispensing agent for dispenser pump
D 1 has been altered (to a higher concentration), a rapid adjustment
can be made with the correction factor.
Calculate the correction factor using the following formula:
Correction factor D1 =
Access the following content:
Supervisor level
Settings
Dispensing correction factor
Dispenser empty signal
OK
Select "Dispensing correction factor".
Supervisor level
Settings
Dispensing pump 1
Dispensing pump 2
OK
You have the following options:
– 0.01 to 1.99
– 2
Once you exit the supervisor level, the new dispensing amounts are
used in the programs but the programming is not changed.
New quantity Dos-p. D1
Current quantity Dos-p. D1
:
1,00
:
1,00
Settings option
97