Information on Cloths standard program
The program Cloths Standard is suitable for cleaning cloths that are not to be used imme-
diately after washing, but are to be stored after drying.
Information on Cloths...+ finish program
The Cloths . . . + finish programs prepare cloths for use by treating them with cleaning
agent or disinfectant: a finishing step with a final spin is added after the washing or disin-
fecting stage.
Amounts dispensed must be set on site and the standard of disinfection must be checked.
Information on Cloths finish program
The Cloths finish program is suitable for clean and dry cloths. A disinfectant solution is
added during finishing.
Amounts dispensed must be set on site and the standard of disinfection must be checked.
Pads program
Pads
Type of fabric
Program cycle
Mats program
Mats
Type of fabric
Program cycle
Tip: The number of mats per load may vary depending on the size, stiffness and thickness
of the mats.
104 °F (40 °C) / 140 °F (60 °C)
Polishing pads
Pre-rinse
+ 2nd pre-rinse, optional
Main wash 104 °F (40 °C) (selectable range: cold
to 140 °F / 60 °C)
3 rinses
Final spin
104 ° (40 °C)
Door mats
Pre-rinse
Main wash 104 °F (40 °C)
3 rinses
Final spin
Program chart - MOPSTAR
Load ratio/Load
size
Load ratio/Load
size
1:50
PW 413 - 5.7 lb
(2.6 kg)
PW 418 - 8 lb
(3.6 kg)
1:15
PW 413
max. 19.4 lb
(8.8 kg)
PW 418
max. 26.5 lb
(12 kg)
43