Table of Contents
Advertisement
Installation on a base
When installed on a raised base, the machine must be secured to the
base and the base must be secured to the floor. When installed on a
concrete base, the machine must be secured to the base.
Shipping struts
Remove the shipping struts.
The 2 shipping safety devices at the front are each secured with
3 hexagonal screws. The 2 at the back are secured with 4 hexagonal
screws. The shipping struts must only be removed when the machine
is in place, before it is commissioned.
Remove front and back panel.
Unscrew the screws at the bottom of the front panel and remove
the panel.
Installation and connection
77
Advertisement
Table of Contents
