Table of Contents
Advertisement
Settings option
96
Dispensing calibration Dispensing pump 1
t:
V:
100 ml
-
OK
+
Press multifunction button 0/1.
Stop the pump by pressing button 0/1, or the pump will stop auto-
matically after 60 seconds.
Measure the required amount into the measuring vessel.
Dispensing calibration Dispensing pump 1
V:
100 ml
t:
-
OK
Enter the amount measured in field "V:".
The throughput P is calculated in ml/min. by the controls.
Press the "Save" button.
The measured value is assigned to the pump.
Reattach the hose.
Dispensing throughput (D1 to D13)
The throughput of the connected dispenser pumps can be set from
0 ml/min to 9999 ml/min in 1 ml increments.
Access the following content:
Supervisor level
Settings
Dispensing flow rate
Dispensing correction factor
OK
Select "Dispensing throughput".
The following will appear on the display:
Settings
Dispensing flow rate
Dispensing pump 1
: 100,0 ml/min
Dispensing pump 2
:
OK
Options:
– No
– 1 to 9999.0 ml/min
0 s
0/1
30 s
P: 200,0 ml/min
+
0/1
100,0 ml/min
P: No
Advertisement
Table of Contents
