Table of Contents
Advertisement
Dispensing option
88
Dispensing option
This menu option allows you to change individual dispensing settings.
Supervisor level
Main menu
Dispensing
Settings
OK
Select "Dispensing".
The following will appear on the display:
Supervisor level Dispensing
1 Mops Standard
2
Mop Thermal Disinfection
OK
Select the relevant program.
Once the program is selected, the dispensing parameters will appear:
Dispensing 1 Mops Standard
Area 1
:
Pre-wash
Block 1:
Pre-wash
OK
Select the required range and block.
Dispensing 1 Mops Standard
Dispensing type
:
Dispensing phase 1:
OK
The options will appear:
– No
– Quantity in ml
– Concentration ml/l
– Concentration ml/kg
When "Dispensing method: No" is set, dispensing phases 1 and 2
are disabled.
Dispensing 1 Mops Standard
Dispensing phase 1
:
Dispensing phase 2
:
OK
With the quantity and concentration settings, you can select "No" or
"User-defined" for dispensing phases 1 and 2.
140
°F
194
°F
No
No
No
Advertisement
Table of Contents
