Additional functions
Setting a start
time
54
Start time
A later wash start time can be set for a program using the "Start
time" button.
Select the wash program.
Once a program has been selected, the following (for example) will
appear on the display:
1
Mops Standard
Cold
Pre-wash
194
°F
Main wash
+
Press the Start time button.
The following (for example) will appear on the display:
1
Mops Standard
Start time:
20
:14
After setting the delay start press Start.
OK
The current time and date always appear. The entry field for hours is
highlighted.
Press OK .
The entry field for hours will be enabled.
Press the - or + button to change the hours.
Press OK to confirm your entry.
Press to select the "Minutes" field, and confirm with OK.
Press the - or + button to change the minutes.
Press to select the "Start day" field, and confirm with OK.
Press the - or + button to change the day.
Change the month and year in the same way if required.
Once you have set the start time, press "START".
The display will show the current time and date and the start time.
1
Mops Standard
Pre-wash
20:50
3.1.2015
-
+
Tip: If the door is opened again, the "START" button must be pressed
again. Opening the door clears the start time set.
13,0/13,0 kg
-+
13,0/13,0 kg
Start date:
3.1.2015
13,0/13,0 kg
Start: 6:00
4.1.2015
-