Additional Functions; With Pre-Wash / Starching / Without A Spin - Miele WS 5243 Operating Instructions Manual

Additional functions

With Pre-wash
A pre-wash can be selected for heavily soiled
laundry.
The pre-wash programme block can be se-
lected before starting a programme by press-
ing the Block + T button. The indicator light
above the button lights up.
Starching
Starching can be selected before starting a
programme by pressing the Starch hold U
button. The indicator light above the button
lights up.
PROGRAMME 25
Rinse 3
STARCH HOLD
Press the starch and starch hold button.
When the "Starch" point has been reached in
the programme sequence, "Starch hold"
flashes in the Display
The programme is continued by pressing the
Starch hold U button, (the indicator light light
goes out). Add the starch formulation, pre-
pared according to the producers's instruction-
s to the inflowing water via the correct
dispenser compartment. The wash time is
automatically extended by 4 minutes.
Filling the starch directly into the drum
When the "Starch" point is reached in the se-
quence, "Starch hold" flashes in the Display.
Open the drum door on the "Unclean side"
and add the starch formulation, prepared ac-
cording to the producer's instructions. Shut
the drum door. The message "power cut pro-
gramme stop" will then appear in the Display.
Press the Start X button.
This message will appear again:
PROGRAMME 25
Rinse 3
STARCH HOLD
Press the starch and starch hold button.
Press the Starch hold U button (the indicator
light goes out) and the programme continues.
M.-Nr. 05730940
COTTONS
COTTONS
Without spin
Without spin can be selected before starting a
programme by pressing the Without spin V
button. The indicator light above the button
lights up.
PROGRAMME 25
Rinse 3
WITHOUT SPIN
Press the without spin or end button.
When the "Spin" programme point is reached,
"Without spin" flashes in the Display. If you
want to continue the programme with a spin
press the Without spin V button again. To fin-
isht the programme without a spin simple
press the End 7 button and the programme
will finish with water still in the machine.
To open the door select the SEPARATE
DRAIN and press the Start X button.
Skipping programme stages
Stages in the programme in progress can be
skipped or blocks repeated.
Press the End"7 " button and the programme
is stopped.
PROGRAMME 25
Main wash
PROGRAMME STOP
Programme stop flashes in the Display.
Use the 2 cursor to skip the programme
block by block to the end.
Use the 1 cursor to skip the programme
block by block back to the beginning.
At the position required press the press the
Start X button to continue the programme
again.
20
COTTONS
COTTONS