Table of Contents
Advertisement
INSTALLATION
When operating the
Antigua
controls be
™
sure to observe all cautions
and warnings given in the
manual to prevent injury to
both operator and client.
• Leveling Feet
IMPORTANT
CAUTION
The table weighs as much
as 200 lbs. DO NOT lift or
move the unit without using
proper safely procedures
or equipment. DO NOT turn
the
Antigua
on its side for
™
any reason. To do so could
cause damage to the base
and will void the warranty.
There are no serviceable
items that require this action.
Never lift the table by grasp-
ing the table top as the
table top is not designed to
hold the weight of the base
and you could damage the
table.
The Antigua
comes completely assembled and ready to use. Plug the cord
™
into a functioning outlet that is rated for the table.
Arrange the power cord and control cords so that they will not create a trip-
ping hazard. Place the controls in a safe location where they are convenient
and accessible. Keep the controls out of the way of all table mechanisms.
L E VE L I N G I NS T R UC T IO N S :
If Table Will Not Sit Flat on the Floor:
The Antigua
is equipped with Leveler Feet that adjust to level the table
™
on uneven floors. To adjust the Leveler Feet to suit common floor
differences you will need to use a
able wrench. Adjust each leg individually in turn by adjusting the height
of each leveler foot until the unit rests level and steady. This adjust-
ment will not effect the function of the table.
Leveler Foot
INSTALLATION - LEVELING INSTRUCTIONS
1
/
" open-end wrench or an adjust-
2
1/2" Open-end Wrench
4
Advertisement
Table of Contents
