Table of Contents
Advertisement
DIRECTIONS FOR USE
• Adjusting Height of the
DIRECTIONS FOR USE
Antigua™
• Foot Control
CAUTION
When operating the
controls and making
Antigua
™
any and all adjustments to the
table, move hands, feet and
controls away from any work-
ing mechanisms of the table.
Children must be supervised
when around this equipment
by a responsible adult. Do not
leave children alone or allow
them to operate the controls.
Do not allow children to crawl
into the cabinet or under the
table.
When operating the
Antigua™
controls be
sure to observe all cautions
and warnings given in the
manual to prevent injury to
both operator and client.
IMPORTANT
CAUTION
DO NOT use the hand
control and the foot control
simultaneously as this can
cause damage to one or
both units.
Antigua™
using the Foot Control
ADJUSTING HEIGHT OF THE TABLE:
The O
®
Antigua
AKWORKS
control that operates the backrest and leg rest positioning functions as
well as a foot control that operates the height. The lifting motor is
equipped with a thermal overload limiter. It has a 10% duty cycle, 2
minutes operating and 18 minutes off
Foot Controls:
Operate the foot control as shown below to raise or lower the height
of the Antigua
. The foot control allows the therapist to adjust the
™
height function separately from the other functions found on the hand
control whenever needed. When operating the table's controls, be sure
to follow all cautions and warnings as given in the manual.
Foot Control (1):
(used only to change height of table)
UP
To move the table
position higher, press
down on the left
side of the foot
control
5
comes complete with a multifunctional hand
™
DOWN
To move the table
position lower, press
down on the right
side of the foot
control
Advertisement
Table of Contents
