Table of Contents
Advertisement
DIRECTIONS FOR USE
MOVING THE TABLE
CAUTION
When moving the table, place one person at each end of the table. Have each person firmly grasp the base
at the bottom and lift the table. Be aware and use proper, safe procedures for moving a table of this size to
prevent injury to yourself or the table. We strongly recommend that a flatbed dolly be used that can hold the
entire table when moving the table long distances.
at low height range
T A B L E L E V E L I N G I N S T R U C T I O N S
1. Place the table in the location where you plan to use it.
2. Rock the table to determine if it is level with the floor. If
the table rocks back and forth at all, the foot that clears the
floor when you rock the table will need adjustment.
3. Adjust the Leveler Foot by first loosening the locking
nut found just above the rubber Leveler Foot with the 1/2"
open-end wrench.
4. Lower the adjustable rubber Leveler Foot until it meets
the floor snugly. Tighten the locking nut against the leg of
the table with the 1/2" open-end wrench to fix the Leveler
Foot in position.
5. Rock the table again to be sure adjustments have
stabilized the table. If necessary make any additional
adjustments in the same way.
Before moving the table, disconnect the power cord from the power outlet. The table
weighs as much as 135 lbs. (61 kg.) Never lift the table by grasping the table top.
You could damage the table and the electronics that run the tabletop. Two people
are required to move the table safely. Do not use the table to transport a client.
Grasp at base
end rail
16
Advertisement
Table of Contents
