Quicklock ™ Face Rest - OAKWORKS antigua ATRC Instruction Manual

DIRECTIONS FOR USE
• Accessory Option:
QuickLock
™
Face Rest
Be sure to read all
cautions, warnings
and instructions given
in the manual to prevent
injury to both operator
and client.
 IMPORTANT
CAUTION
Do not put excessive weight
or pressure on the face rest.
Excessive pressure can cause
premature failure of the
QuickLock Face Rest.
™
* U.S. Patent #5,177,823
QuickLock FACE REST:
™
Double articulating action provides nearly limitless positioning options
with the QuickLock Face Rest.The adjustable pad takes pressure off
™
sensitive facial areas while providing superb support. The QuickLock
Face Rest can be used in both prone and supine positioning and folds
out of the way when not in use. Adjustments are made easily by loosen-
ing the cam locks, adjusting for height and angle and then locking the
cam locks into that position. The
table for a variety of uses and outlets at the other end that work as well
for additional procedures.
QuickLock Face Rest
™
Attaching the QuickLock
When attaching the QuickLock
using the provided outlets, just slide the frame dowels into the outlets
being sure to keep the 1 st cam lock within 3" of the table to ensure a stable
connection.
To remove the QuickLock
™
until it comes free. Set it safely aside or store it inside the under-table
cabinet until needed.
outlets
Important Safety Note: Maximum
Distance from edge of table = 3"
ACCESSORY OPTIONS
• QuickLock
has outlets at the head of the
Antigua
™
Important Safety Note: Maximum
Distance from edge of table = 3"
3"
Face Rest / Head & Foot End Outlets:
™
Face Rest to the head or foot end by
™
Face Rest, just pull the frame from the outlet
12
Face Rest
™
™