Accessory Option: Table Extender - OAKWORKS antigua ATRC Instruction Manual

DIRECTIONS FOR USE
• Accessory Option:
Table Extender
Be sure to read all
cautions, warnings
and instructions given
in the manual to prevent
injury to both operator
and client.
CAUTION
Do not put excessive weight
or pressure on the extender.
Excessive pressure can cause
premature failure of the Table
Extender.
• Moving the
Antigua
™
CAUTION
The table weighs as much
as 200 lbs. DO NOT lift or
move the unit without using
proper safety procedures
or equipment. DO NOT turn
the Antigua on its side for
™
any reason. To do so could
cause damage to the base
and will void the warranty.
There are no serviceable
items that require this action.
Never lift the table by grasp-
ing the table top as the
table top is not designed to
hold the weight of the base
and you could damage the
table.
CAUTION
Before moving the Antigua
disconnect the power cord
from the power outlet and
secure the electrical cord,
hand control and foot con-
trols for moving.

• Accessory Option: Table Extender

Outlets
The optional stationary Table Extender provides ultimate comfort for
your tallest clients, quickly and easily. The Table Extender comes with
two connecting arms that slide into the outlets at the foot end of the
tabletop. Slide these fully into the outlets so the Table Extender is flush
to the end of the table top. This Stationary Extender provides 11" of
additional comfort and support when needed.
Antigua
M
O V I N G T H E
Position 8 at low height range
The weighs approximately 200 lbs. You will need 4 people
Antigua
™
working together if it is necessary to move the table. Never lift the table
by grasping the table top as the table top is not designed to hold the
weight of the base and you could damage the table and the electronics
that run the tabletop.
If you need to move the table, place one person at each corner of the
table. We recommend that you have the table top in a flex position(with
Arm Rests removed) to have the table top ends out of the way as much
a possible. Have each person firmly grasp the cabinet base at the bot-
tom by the table legs and lift the table from the base. As when moving
any piece of heavy equipment, bend at the knee and lift with your legs
beneath you and not with your back. Be aware and use proper, safe
,
™
procedures for moving a table of this size to prevent injury to yourself
or the table. We strongly recommend that a flatbed dolly be used that
can hold the entire table if moving the table involves any distance.
ACCESSORY OPTIONS
• Moving the
:
™
Grasp
at base
corner
14
Antigua
™