Fine Adjusting Image Position; For Intellectual Stack Users - Christie DWU1052 User Manual

2.5 Fine adjusting image position

To superimpose the images of Main (Set B) and Sub (Set A), fine adjust the
image size and position of Main (Set B) using 3D KEYSTONE.

For Intellectual Stack users

1.
Press the MENU button on the remote control or the
control panel on Main (Set B) to display the MENU
dialog.
Highlight MAIN with the ▲/▼ buttons, and press the
► button.
Menu on Main (Set B) will appear.
2.
Using the ▲/▼/◄/► buttons on the remote control
or the control panel on Main (Set B), select 3D
KEYSTONE from EASY MENU, or the SETUP menu
of ADVANCED MENU.
MENU or SETUP
The image for Intellectual Stack appears on screen.
This image includes a TEMPLATE screen with the 3D
KEYSTONE dialog from Main (Set B) and another
TEMPLATE screen from Sub (Set A).
3.
Using 3D KEYSTONE on Main (Set B), adjust the
image size and position of Main (Set B) to
superimpose to the image of Sub (Set A).
(Operating Guide
Adjust 3D KEYSTONE in the following ways.
(1) Roughly adjust the four corners in the order below.
Top left → Top right
→ Bottom right → Bottom left
(2) Fine adjust the four corners in the same way.
NOTE • Refer to
DWU1052/DHD1052
User's Manual - Instant Stack Guide
(Operating Guide
menu)
→
EASY MENU
users. ( 12 )
NOTES for all
→
EASY
or SETUP menu)
11
Installation
Main (Set B)
Image from Main (Set B)
Image from Sub (Set A)
Superimposed image
Superimposed image
020-000856-01 Rev.1 (12-2015)
LIT MAN USR DWU/DHD1052 ISG