Christie DWU1052 User Manual page 16

3.2 Selecting Main, Sub, or off
NOTE • A menu to select MAIN or SUB appears on screen when a button
on the control panel of the projector or remote control is pressed. Select the
projector that you want to operate. Refer to the examples below.
- When the MENU button is pressed, a menu to select MAIN or SUB is displayed.
If MAIN is selected, EASY MENU or ADVANCED MENU of the Main projector
is displayed.
- When one of the buttons from KEYSTONE, FOCUS + / -, ZOOM, ZOOM + / -
and LENS SHIFT is pressed, a menu to select MAIN or SUB is displayed.
If MAIN is selected, each menu or dialog of the Main projector is displayed.
- When the ENTER button is pressed for three seconds, a menu to select MAIN
or SUB is displayed. If MAIN is selected, the Status Monitor on the Main
Projector can be operated.
• There are operating
restrictions as follows.
- AUTO POWER OFF and
FREEZE functions on both
projectors are disabled.
- It takes slightly longer time to turn
on the projectors. This is not a
malfunction.
• The screen may be darker when
any of the OSDs are displayed in
PbyP or PIP display because one of
the two projectors displays the black
screen.
(continued on next page)
DWU1052/DHD1052
User's Manual - Instant Stack Guide
(continued)
Menu to select
15
STACK menu settings

MAIN or SUB
Menu to select
MAIN or SUB
Menu on Main projector

Menu on Main projector
020-000856-01 Rev.1 (12-2015)
LIT MAN USR DWU/DHD1052 ISG