Christie DWU1052 User Manual page 30

6. Restrictions on Schedule function
 *1): This Schedule can be input to Projector Web Control even if the projectors
are operating in Intellectual Stack. If the input port to be changed according to
the Schedule function can be used in Intellectual Stack, the Schedule will be
executed. If not, it will not be executed.
X *2): This Schedule can be input to Projector Web Control when the projectors
are operating in Intellectual Stack but it will not be executed.
X *3): This Schedule can neither be input to Projector Web Control nor be executed
when the projectors are operating in Intellectual Stack.
• If the Schedule is not executed, an error message will be sent in
NOTE
accordance with the conditions set in Schedule Execution Error on Projector
Web Control. (Network Guide
• When the menu is displayed on one of the projectors, the Schedule function
for My Image and Messenger on the other projector will not be executed.
• Power Off in the table refers to turning off the power and entering the standby
mode according to the Intellectual Stack settings or by pressing the STANDBY
button on the remote control or STANDBY/ON button of the Main projector.
• The projectors cannot be turned on by the Schedule function on the Sub
projector. Set it on the Main projector if necessary.
DWU1052/DHD1052
User's Manual - Instant Stack Guide
Restrictions on Schedule function
(continued)
→
3.1.6 Alert
29
Settings)
020-000856-01 Rev.1 (12-2015)
LIT MAN USR DWU/DHD1052 ISG