3. STACK menu settings
Set the Intellectual Stack operation using the STACK menu.
NOTE
• If using Simple Stack without RS-232C connection, skip this chapter.
• Read
3.5 Important information for Intellectual Stack
3.1 Displaying STACK menu
Use the ▲/▼/◄/► buttons to go into the following menu.
ADVANCED MENU > OPTION
> SERVICE > COMMUNICATION > STACK
STACK menu will appear on screen.
(Operating Guide
The setting for Intellectual Stack operation starts from this menu.
• Check that the following settings are made on both projectors.
NOTE
Otherwise, STACK menu on the projectors cannot be operated. ( 5 )
- STANDBY MODE in SETUP menu: NORMAL
(Operating Guide
- COMMUNICATION TYPE under COMMUNICATION in SERVICE menu: OFF
(Operating Guide
- STACK LOCK in SECURITY menu: OFF ( 5 )
DWU1052/DHD1052
User's Manual - Instant Stack Guide
→
OPTION
menu)
→
SETUP
menu)
→
OPTION
menu)
carefully. ( 19 )
13
020-000856-01 Rev.1 (12-2015)
LIT MAN USR DWU/DHD1052 ISG