RAM Promaster 2016 User Manual page 24

Table of Contents

Advertisement

G E T T I N G S T A R T E D
Swivel Seat
The swivel seat lever is located at the lower front inboard side of the seat. The seat
may be turned through 180° toward the seat on the opposite side and approximately
35° toward the door. The seat may be locked in the driving position or at the 180°
position. To swivel the seat, pull the swivel seat inboard lever outward, turn the seat
to the desired position and release the lever. The swivel seat back lever is located at
the lower front outboard side of the seat, to tilt the seat back forward or rearward.
If the vehicle is equipped with interlocking swivel seats, the seats must be locked in
facing forward position while driving. If the seats are not in the correct position, a
warning will display in the EVIC.
If the driver or the passenger seats are not locked in facing forward position before
the first vehicle movement, shifting out of park is not allowed until the seats are both
locked in facing forward position. When the seats are not in the right position and the
first vehicle movement after the cranking is attempted, a chime and a text message
will appear in EVIC. Rotate and lock the swivel seats in the correct position before
trying again.
If the driver or the passenger seats are not locked in facing forward position during
movement of the vehicle, a message will be visualized in the EVIC and an intermit-
tent chime will sound until key-off or until the swivel seats are locked in facing
forward position. Stop and move the swivel seats in the correct position before
proceeding.
If a fault is present in the system and it is not possible to check the correct position
of the swivel seats, a message and the generic warning light appears in the EVIC to
inform about the failure. In these conditions, check the status of the swivel seats and
not drive the vehicle until the swivel seats are locked in facing forward position.
Swivel Seat Lever
22

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents