RAM PROMASTER 2020 Owner's Manual
  1. Manuals
  2. Brands
  3. RAM Manuals
  4. Automobile
  5. PROMASTER 2020
  6. Owner's manual

RAM PROMASTER 2020 Owner's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
RAM PROMASTER
20 2 0 OWNER' S M ANUAL

Advertisement

Table of Contents
loading

Related Manuals for RAM PROMASTER 2020

Summary of Contents for RAM PROMASTER 2020

  • Page 1 RAM PROMASTER 20 2 0 OWNER’ S M ANUAL...
  • Page 2 This Owner’s Manual illustrates and describes the operation of features and equipment that are either standard or optional on this vehicle. This manual may also include a description of features and equipment that are no longer available or were not ordered on this vehicle. Please disregard any features and equipment that are no longer available or were not ordered on this vehicle.

  • Page 3: Table Of Contents

    TABLE OF CONTENTS INTRODUCTION ..........................7 GETTING TO KNOW YOUR VEHICLE ................... 9 GETTING TO KNOW YOUR INSTRUMENT PANEL ............44 SAFETY ............................60 STARTING AND OPERATING ....................96 IN CASE OF EMERGENCY ..................... 128 SERVICING AND MAINTENANCE ..................159 TECHNICAL SPECIFICATIONS ....................202 MULTIMEDIA ..........................210 CUSTOMER ASSISTANCE .....................260...
  • Page 4 INTRODUCTION Lane Change Assist..........28 SEATS ..............17 Battery Saver............28 Manual Adjustments........17 HOW TO USE THIS MANUAL........8 INTERIOR LIGHTS ..........28 Heated Seats — If Equipped ......21 Essential Information.........8 Fold Down Tray — If Equipped ......21 Courtesy Lights..........28 Symbols...............8 Adjustable Armrests — If Equipped ....22 Illuminated Entry ..........30 WARNINGS AND CAUTIONS........8 WIPERS AND WASHERS ........
  • Page 5 GETTING TO KNOW YOUR SAFETY ENGINE BLOCK HEATER — IF EQUIPPED ... 97 ENGINE BREAK-IN RECOMMENDATIONS ..97 INSTRUMENT PANEL SAFETY FEATURES..........60 PARKING BRAKE ..........98 Four-Wheel Anti-Lock Brake System (ABS)..60 INSTRUMENT CLUSTER......... 44 AUTOMATIC TRANSMISSION ......99 Electronic Brake Control (EBC) System ..61 Instrument Cluster Descriptions .....45 Key Ignition Park Interlock ......
  • Page 6 IN CASE OF EMERGENCY VEHICLE LOADING ..........116 TOWING A DISABLED VEHICLE ......157 Vehicle Certification Label ......116 Automatic Transmission ....... 158 HAZARD WARNING FLASHERS......128 Gross Vehicle Weight Rating (GVWR)... 116 ENHANCED ACCIDENT RESPONSE SYSTEM BULB REPLACEMENT ........129 Gross Axle Weight Rating (GAWR) ....116 (EARS) ..............158 Replacement Bulbs ........
  • Page 7 FLUID CAPACITIES ..........207 USB Charging Port......... 252 Seats And Fabric Parts........199 FLUIDS AND LUBRICANTS ........ 208 RAM TELEMATICS - IF EQUIPPED ......253 Plastic And Coated Parts ......200 Engine ............208 Ram Telematics General Information..253 Leather Parts ..........200 Chassis............
  • Page 8 CUSTOMER ASSISTANCE UCONNECT VOICE RECOGNITION .....255 WARRANTY INFORMATION........262 Introducing Uconnect........255 MOPAR PARTS.............262 SUGGESTIONS FOR OBTAINING SERVICE FOR Get Started ............ 255 REPORTING SAFETY DEFECTS ......262 YOUR VEHICLE ............ 260 Basic Voice Commands ........ 256 In The 50 United States And Prepare For The Appointment ......

  • Page 9: Introduction

    INTRODUCTION Dear Customer, Congratulations on selecting your new vehicle. Be assured that it represents precision workmanship, distinctive styling, and high quality. This Owner’s Manual has been prepared with the assistance of service and engineering specialists to acquaint you with the operation and maintenance of your vehicle.

  • Page 10: How To Use This Manual

    HOW TO USE THIS MANUAL VAN CONVERSIONS/CAMPERS The New Vehicle Limited Warranty does not apply to body modifications or SSENTIAL NFORMATION special equipment installed by van conversion/camper manufacturers/ Consult the Table of Contents to determine which section contains the body builders. US residents refer to the Warranty Information, Section information you desire.

  • Page 11: Getting To Know Your Vehicle

    GETTING TO KNOW YOUR VEHICLE KEYS 1 — Mechanical Key Release Button 2 — Driver/Passenger Unlock Button 3 — Lock Button Your vehicle uses a key start ignition system. 4 — Cargo Lock/Unlock Button The ignition system consists of a key fob with a Remote Keyless Entry (RKE) and an ignition Remote Keyless Entry (RKE) switch.
  • Page 12 GETTING TO KNOW YOUR VEHICLE NOTE: To Lock The Doors The recommended replacement battery is The key fob may not be able to be detected by CR2032. Push and release the lock button on the key fob the vehicle if it is located next to a mobile to lock all doors.

  • Page 13: Ignition Switch

    GETTING TO KNOW YOUR VEHICLE This device complies with Part 15 of the FCC La operación de este equipo está sujeta a las WARNING! Rules and with Innovation, Science and siguientes dos condiciones: The integrated key fob contains a coin cell Economic Development Canada license-exempt ...

  • Page 14: Key-In-Ignition Reminder

    GETTING TO KNOW YOUR VEHICLE 3. Remove the key from the mechanical CAUTION! WARNING! ignition switch. An unlocked vehicle is an invitation. Always Never leave children alone in a vehicle, or  with access to an unlocked vehicle. Leaving remove the key from the ignition and lock all children in a vehicle unattended is the doors when leaving the vehicle dangerous for a number of reasons.

  • Page 15: Replacement Keys

    GETTING TO KNOW YOUR VEHICLE NOTE: This device complies with Part 15 of the FCC EPLACEMENT A key which has not been programmed is also Rules and with Innovation, Science and NOTE: considered an invalid key, even if it is cut to fit Economic Development Canada license-exempt Only keys that have been programmed to the the ignition switch lock cylinder for that vehicle.

  • Page 16: Vehicle Security Alarm - If Equipped

    GETTING TO KNOW YOUR VEHICLE La operación de este equipo está sujeta a las YSTEM EARMING YSTEM siguientes dos condiciones: To arm the system, the Vehicle Security Alarm If the system has not been disabled, the Vehicle 1. es posible que este equipo o dispositivo no will set when you use the key fob to lock the Security Alarm will rearm itself after the 15 cause interferencia perjudicial y...
  • Page 17 GETTING TO KNOW YOUR VEHICLE LED ON: Doors locked. Push the right side  WARNING! of the central lock/unlock button once again to centrally unlock all doors. The LED will Before exiting a vehicle, always shift the  switch off. automatic transmission into PARK or the manual transmission into FIRST gear or LED OFF: Doors unlocked.

  • Page 18: Auto Unlock Doors

    GETTING TO KNOW YOUR VEHICLE — I 4. Push the lock button on the driver’s side EATURE QUIPPED CAUTION! door panel. The indicator light will illuminate Delivery vehicles may be equipped with the An unlocked vehicle is an invitation. Always to show the doors are locked.

  • Page 19: Seats

    GETTING TO KNOW YOUR VEHICLE 6. Push the lock button on the instrument To verify the procedure is complete, place the ANUAL DJUSTMENTS panel. The indicator light will illuminate to ignition in the AVV (START) position, then back The driver and passenger seats can be adjusted show the doors are locked.
  • Page 20 GETTING TO KNOW YOUR VEHICLE Forward And Rearward Adjustment Height Adjustment The adjusting bar is at the front of the seat, near Without Swivel Seat the floor. Pull the bar upward to move the seat The height adjusting levers are located on the forward or rearward.
  • Page 21 GETTING TO KNOW YOUR VEHICLE Height Adjustment Knobs Recliner Knob Recliner Lever 1 — Front Height Adjusting Knob With Swivel Seat WARNING! 2 — Rear Height Adjusting Knob The recliner lever is located at the lower front Adjusting a seat while the vehicle is moving ...
  • Page 22 GETTING TO KNOW YOUR VEHICLE Lumbar Support — If Equipped This feature allows you to increase or decrease the amount of lumbar support. The lumbar control knob is located on the rear upper outboard side of the driver's seatback. Rotate the control forward to increase and rearward to decrease the desired amount of lumbar support.

  • Page 23: Heated Seats - If Equipped

    GETTING TO KNOW YOUR VEHICLE If the driver or the passenger seats are not WARNING! locked in the facing forward position during movement of the vehicle, a message will appear Do not place anything on the seat or seat-  in the instrument cluster display and an back that insulates against heat, such as a intermittent chime will sound until key-off or...

  • Page 24: Adjustable Armrests - If Equipped

    GETTING TO KNOW YOUR VEHICLE HEAD RESTRAINTS The fold-down tray is equipped with two cup holders and a support surface with a paper Head restraints are designed to reduce the risk holder clip. of injury by restricting head movement in the event of a rear impact.

  • Page 25: Front Head Restraint Adjustment

    GETTING TO KNOW YOUR VEHICLE STEERING WHEEL RONT ESTRAINT DJUSTMENT RONT ESTRAINT EMOVAL To raise the head restraint, pull upward on the To remove the head restraint, raise it up as far ELESCOPING TEERING OLUMN head restraint. To lower the head restraint, as it can go.

  • Page 26: Mirrors

    GETTING TO KNOW YOUR VEHICLE To unlock the steering column, pull the control Headlight glare can be reduced by moving the WARNING! handle up. To lengthen or shorten the steering small control under the mirror to the night column, pull the steering wheel outward or push position (toward the rear of the vehicle).

  • Page 27: Power Mirrors - If Equipped

    GETTING TO KNOW YOUR VEHICLE — I — OWER IRRORS QUIPPED OWER OLDING IRRORS QUIPPED The power mirror controls are located on the driver-side door trim panel. The switch for the power folding mirrors is located on the driver’s door panel below the power mirror controls.

  • Page 28: Heated Mirrors - If Equipped

    GETTING TO KNOW YOUR VEHICLE NOTE: CAUTION! The intended use of the power fold mirrors is by pushing the buttons to fold and unfold the Leaving the mirror in a non powered position, mirrors. Only manually fold the mirrors when accidental impact or manual fold, may cause necessary.

  • Page 29: Daytime Running Lights (Drls)

    GETTING TO KNOW YOUR VEHICLE (DRL ) — The Daytime Running Lights will come on AYTIME UNNING IGHTS ARKING IGHTS whenever the ignition is ON, the headlight QUIPPED These lights can only be turned on with ignition switch is off, and the turn signal is off. key in the STOP (OFF/LOCK) position or NOTE: ELECT...

  • Page 30: Fog Lights - If Equipped

    GETTING TO KNOW YOUR VEHICLE INTERIOR LIGHTS The warning light on the instrument panel will IGNALS light up and the corresponding message will Move the multifunction lever up or down and appear in the instrument cluster display for as OURTESY IGHTS the arrows on each side of the instrument long as the function is activated.
  • Page 31 GETTING TO KNOW YOUR VEHICLE Dome Lights CAUTION! The interior lights can be set to three different Before getting out of the vehicle be sure that positions (off/left position, center position, on/ the switch is in the center position or that the right position).

  • Page 32: Illuminated Entry

    GETTING TO KNOW YOUR VEHICLE Your vehicle may also be equipped with a cargo NOTE: Ambient Light lamp on the center of the ceiling of the cargo If the ignition is placed in the OFF position, the The vehicle is equipped with ambient light on area.

  • Page 33: Wipers And Washers

    GETTING TO KNOW YOUR VEHICLE WIPERS AND WASHERS Intermittent Wiper System WARNING! Push the lever downward to the first detent and RONT IPER PERATION Sudden loss of visibility through the rotate the center ring to use one of the four windshield could lead to a collision.

  • Page 34: Climate Controls

    GETTING TO KNOW YOUR VEHICLE CLIMATE CONTROLS ANUAL LIMATE ONTROL VERVIEW The Manual Temperature Controls consist of The Climate Control System allows you to a series of three outer rotary dials (blower regulate the temperature, air flow, and direction speed, temperature and mode) and three of air circulating throughout the vehicle.
  • Page 35 GETTING TO KNOW YOUR VEHICLE Icon Description Front Defrost Mode Turn the mode control knob to the Front Defrost position. Air comes from the windshield and side window demist outlets. When the defrost button is selected, the blower level may increase. Use Defrost mode with maximum temperature settings for best windshield and side window defrosting and defogging.
  • Page 36 GETTING TO KNOW YOUR VEHICLE Icon Description Panel Mode Panel Mode Air comes from the outlets in the instrument panel. Each of these outlets can be individually adjusted to direct the flow of air. The air vanes of the center outlets and outboard outlets can be moved up and down or side to side to regulate airflow direction.
  • Page 37 GETTING TO KNOW YOUR VEHICLE Additional Rear Climate Control — NOTE: These switches must be enabled for operation If Equipped by the Upfitter. These switches, mounted on the instrument panel to the left of the steering column, activate the additional rear heating/air conditioning system.

  • Page 38: Climate Control Functions

    GETTING TO KNOW YOUR VEHICLE Recirculation recommended. Refer to “Fluids And Lubricants” LIMATE ONTROL UNCTIONS in “Technical Specifications” for more In cold weather, use of Recirculation mode may A/C (Air Conditioning) information. lead to excessive window fogging. The The Air Conditioning (A/C) button allows the Winter Operation Recirculation feature may be unavailable if operator to manually activate or deactivate the...
  • Page 39 GETTING TO KNOW YOUR VEHICLE NOTE: In winter months, make sure the air intake is CONTROL Recirculate without A/C should not be used for clear of ice, slush, and snow. WEATHER SETTINGS long periods, as fogging may occur. A/C Air Filter Operate in Cool Sunny The climate control system filters outside air...

  • Page 40: Windows

    GETTING TO KNOW YOUR VEHICLE WINDOWS NOTE: WARNING! The power window switches remain active for Never leave children alone in a vehicle, or up to three minutes after the ignition switch has OWER INDOWS  with access to an unlocked vehicle. been placed in the STOP (OFF/LOCK) position.

  • Page 41: Window Bar Grates - If Equipped

    GETTING TO KNOW YOUR VEHICLE — I INDOW RATES QUIPPED UFFETING This vehicle may be equipped with metal grates Wind buffeting can be described as the over the side door windows. This feature is a perception of pressure on the ears or a part of the vehicle’s safety system, and is helicopter-type sound in the ears.

  • Page 42: Closing

    GETTING TO KNOW YOUR VEHICLE INTERNAL EQUIPMENT 3. Raise the hood and place the hood prop rod CAUTION! in hood slot to secure the hood in the open position. To prevent possible damage: TORAGE Before closing hood, make sure the hood Glove Compartments ...
  • Page 43 GETTING TO KNOW YOUR VEHICLE Front Door Storage — If Equipped Underseat Storage Tray (Driver Side Only) — If Equipped Storage areas and bottle holders are located in both the front door trim panels. A storage tray is located under the driver’s seat. To remove the tray, lift up on the tray to withdraw it from the hooks on the support base, then slide the tray out from under the seat.

  • Page 44: Cupholders

    GETTING TO KNOW YOUR VEHICLE UPHOLDERS OWER UTLETS The cupholders for the driver’s and passenger’s Passenger Compartment Power Outlet area are located near the floor just under the The power outlet is located on the instrument center stack storage compartment. There are panel passenger compartment near the cup cupholders located in each door panel as well holder.

  • Page 45: Auxiliary Switches - If Equipped

     driving the vehicle. For further information on using the auxiliary If this outlet is mishandled, it may cause an switches, please refer to the Ram Body Builders  electric shock and failure. Guide by accessing www.rambodybuilder.com and choosing the appropriate links.

  • Page 46: Getting To Know Your Instrument Panel

    GETTING TO KNOW YOUR INSTRUMENT PANEL INSTRUMENT CLUSTER Instrument Cluster...

  • Page 47: Instrument Cluster Descriptions

    GETTING TO KNOW YOUR INSTRUMENT PANEL jamb stating what the mileage was before the 3. Tachometer NSTRUMENT LUSTER ESCRIPTIONS repair or service. It is a good idea for you to This gauge measures engine revolutions  1. Speedometer make a record of the odometer reading per minute (RPM x 1000).

  • Page 48: Instrument Cluster Display

    GETTING TO KNOW YOUR INSTRUMENT PANEL 5. Fuel Gauge You can access the specific information you WARNING! want and make selections and adjustments. The pointer shows the level of fuel in the  A hot engine cooling system is dangerous. fuel tank when the ignition switch is in OCATION ONTROLS...

  • Page 49: Change Engine Oil

    GETTING TO KNOW YOUR INSTRUMENT PANEL This system allows the driver to select a variety Up Arrow Button  of useful information by pushing the switches Push and release the up arrow mounted on the instrument panel. Examples of button to scroll upward through the menu items are: main menu and submenus or adjust the illumination on the...

  • Page 50: Display Setup Menu

    GETTING TO KNOW YOUR INSTRUMENT PANEL Unless reset, this message will continue to The setup menu can be activated by pushing 3. Briefly push and release the MODE button display each time you turn the ignition switch to the MODE button. Single pushes on the up or to store the new setting and go back to the the ON/RUN position.

  • Page 51: Values Displayed

    GETTING TO KNOW YOUR INSTRUMENT PANEL Travel Distance ALUES ISPLAYED ERSONAL ETTINGS This value shows the distance covered since the USTOMER ROGRAMMABLE NOTE: last reset. EATURES All of the following items are accessed by Average Fuel Consumption pressing the TRIP button. Speed Beep ...

  • Page 52: Trip Computer

    GETTING TO KNOW YOUR INSTRUMENT PANEL TRIP COMPUTER New Trip UNCTIONS To reset: Both trip functions are resettable (reset — start The Trip Computer is located in the instrument of new trip). Push and hold the TRIP button to reset the cluster.

  • Page 53: Warning Lights And Messages

    GETTING TO KNOW YOUR INSTRUMENT PANEL WARNING LIGHTS AND MESSAGES Reminder Light will flash or remain on This indicates a possible problem with the continuously and a chime will sound. Refer to electrical system or a related component. The warning/indicator lights will illuminate in “Occupant Restraints Systems”...
  • Page 54 GETTING TO KNOW YOUR INSTRUMENT PANEL If the light continues to flash when the vehicle is NEUTRAL and idle the vehicle. If the The dual brake system provides a reserve running, immediate service is required and you temperature reading does not return to normal, braking capacity in the event of a failure to a may experience reduced performance, an turn the engine off immediately and call for...

  • Page 55: Yellow Warning Lights

    GETTING TO KNOW YOUR INSTRUMENT PANEL Vehicles equipped with the Anti-Lock Brake Oil Pressure Warning Light ELLOW ARNING IGHTS System (ABS) are also equipped with Electronic This warning light will illuminate to Immobilizer Fail / VPS Electrical Alarm Brake Force Distribution (EBD). In the event of indicate low engine oil pressure.
  • Page 56 GETTING TO KNOW YOUR INSTRUMENT PANEL Should one or more tires be in the condition the low tire pressure telltale illuminates, you pressure as intended. TPMS malfunctions may mentioned above, the display will show the should stop and check your tires as soon as occur for a variety of reasons, including the indications corresponding to each tire.
  • Page 57 GETTING TO KNOW YOUR INSTRUMENT PANEL Electronic Stability Control (ESC) Warning The “ESC OFF Indicator Light” and the “ESC Engine Check/Malfunction Indicator  Indicator Light” come on momentarily each Light Warning Light (MIL) time the ignition is placed in the ON/RUN or The “ESC Indicator Light”...

  • Page 58: Yellow Indicator Lights

    GETTING TO KNOW YOUR INSTRUMENT PANEL When the engine is running, the MIL may flash Anti-Lock Brake System (ABS) Warning Generic Warning Light to alert serious conditions that could lead to Light The Generic Warning Light will immediate loss of power or severe catalytic illuminate if any of the following This light monitors the Anti-Lock converter damage.

  • Page 59: Green Indicator Lights

    GETTING TO KNOW YOUR INSTRUMENT PANEL External Light Failure Indicator Light — Cruise Control Indicator Light — REEN NDICATOR IGHTS If Equipped If Equipped Turn Signal Indicator Light The External Light Failure Indicator This indicator light will illuminate The turn signal arrows will flash will come on when a failure to one of when the cruise control is activated.

  • Page 60: Onboard Diagnostic System - Obd Ii

    GETTING TO KNOW YOUR INSTRUMENT PANEL ONBOARD DIAGNOSTIC SYSTEM — OBD II WARNING! CAUTION! Your vehicle is equipped with a sophisticated ONLY an authorized service technician Prolonged driving with the MIL on could   Onboard Diagnostic system called OBD II. This should connect equipment to the OBD II cause further damage to the emission system monitors the performance of the...

  • Page 61: Emissions Inspection And Maintenance

    GETTING TO KNOW YOUR INSTRUMENT PANEL EMISSIONS INSPECTION AND Your vehicle has a simple ignition actuated test, If your OBD II system is not ready, you should which you can use prior to going to the test see an authorized dealer or repair facility. If your MAINTENANCE PROGRAMS station.

  • Page 62: Safety

    SAFETY SAFETY FEATURES WARNING! WARNING! HEEL RAKE The ABS contains sophisticated electronic The ABS cannot prevent collisions,   equipment that may be susceptible to inter- including those resulting from excessive (ABS) YSTEM ference caused by improperly installed or speed in turns, following another vehicle The Four-Wheel Anti-Lock Brake System (ABS) is high output radio transmitting equipment.

  • Page 63: Electronic Brake Control (Ebc) System

    SAFETY (EBC) To receive the benefit of the system, you must Electronic Stability Control (ESC) LECTRONIC RAKE ONTROL apply continuous braking pressure during the YSTEM The Electronic Stability Control (ESC) enhances stopping sequence (do not “pump” the brakes). directional control and stability of the vehicle Your vehicle is equipped with an advanced Do not reduce brake pedal pressure unless under various driving conditions.
  • Page 64 SAFETY ESC On WARNING! WARNING! This mode is the normal operating mode for ESC Electronic Stability Control (ESC) cannot Vehicle modifications, or failure to properly   equipped vehicles. Whenever the vehicle is prevent the natural laws of physics from maintain your vehicle, may change the started, the ESC system will be in this mode.
  • Page 65 SAFETY ESC Activation/Malfunction Indicator Light Be sure to adapt your speed and driving to the WARNING! prevailing road conditions. And ESC OFF Indicator Light When in “Partial Off” mode, the TCS func-  The ESC Activation/Malfunction NOTE: tionality of ESC, (except for the limited slip Indicator Light in the instrument The ESC Activation/Malfunction Indicator feature described in the TCS section), has...
  • Page 66 SAFETY Hill Start Assist (HSA) HSA will work in REVERSE and all forward gears WARNING! when the activation criteria have been met. The The Hill Start Assist (HSA) system is designed to system will not activate if the vehicle is placed If you use a trailer brake controller with your ...
  • Page 67 SAFETY Traction Control System (TCS) NOTE: WARNING! TSC cannot stop all trailers from swaying. The Traction Control System (TCS) monitors the The TCS cannot prevent the natural laws of Always use caution when towing a trailer and  amount of wheel spin of each of the driven physics from acting on the vehicle, nor can follow the trailer tongue weight recommenda- wheels.

  • Page 68: Auxiliary Driving Systems

    SAFETY AUXILIARY DRIVING SYSTEMS The TPMS will warn the driver of a low tire NOTE: pressure if the tire pressure falls below the When filling warm tires, the tire pressure may low-pressure warning limit for any reason, need to be increased up to an additional 4 psi RESSURE ONITORING YSTEM...
  • Page 69 SAFETY NOTE: Base System CAUTION! The TPMS is not intended to replace normal This is the TPMS warning indicator  The TPMS has been optimized for the orig-  tire care and maintenance or to provide located in the instrument cluster. inal equipment tires and wheels.
  • Page 70 SAFETY Tire Pressure Monitoring Low Pressure still exists. The TPMS Warning Light will turn off 2. If a spare tire not equipped with the Tire when the fault condition no longer exists. A Pressure Monitoring sensor is used, the Warnings system fault can occur with any of the following TPMS Warning Light will turn on, flashing for The Tire Pressure Monitoring System Warning...

  • Page 71: Occupant Restraint Systems

    SAFETY General Information La operación de este equipo está sujeta a las Some of the safety features described in this siguientes dos condiciones: section may be standard equipment on some The following regulatory statement applies to all models, or may be optional equipment on Radio Frequency (RF) devices equipped in this 1.

  • Page 72: Seat Belt Systems

    SAFETY 3. If a child from 2 to 12 years old (not in a 9. If the air bag system in this vehicle needs to YSTEMS rear-facing child restraint) must ride in the be modified to accommodate a disabled Buckle up even though you are an excellent front passenger seat, move the seat as far person, refer to the “Customer Assistance”...
  • Page 73 SAFETY Initial Indication The BeltAlert warning sequence may repeat NOTE: based on vehicle speed until the driver and If BeltAlert has been deactivated and the driver If the driver is unbuckled when the ignition occupied outboard front seat passenger seat or outboard front seat passenger (if equipped switch is first in the AVV/START or MAR/RUN belts are buckled.
  • Page 74 SAFETY WARNING! WARNING! WARNING! A lap belt worn too high can increase the Relying on the air bags alone could lead to Be sure everyone in your vehicle is in a seat    risk of injury in a collision. The seat belt more severe injuries in a collision.
  • Page 75 SAFETY WARNING! WARNING! A seat belt that is too loose will not protect A frayed or torn seat belt could rip apart in   you properly. In a sudden stop, you could a collision and leave you with no protection. move too far forward, increasing the possi- Inspect the seat belt system periodically, bility of injury.
  • Page 76 SAFETY 4. Position the lap belt so that it is snug and 6. To release the seat belt, push the red button Adjustable Upper Shoulder Belt Anchorage lies low across your hips, below your on the buckle. The seat belt will automat- In the driver and outboard front passenger abdomen.
  • Page 77 SAFETY As a guide, if you are shorter than average, you To verify the shoulder belt anchorage is latched, Seat Belts And Pregnant Women will prefer the shoulder belt anchorage in a pull downward on the shoulder belt anchorage lower position, and if you are taller than until it is locked into position.
  • Page 78 SAFETY Seat Belt Pretensioner Energy Management Feature The front seat belt system is equipped with The front seat belt system is equipped with an pretensioning devices that are designed to Energy Management feature that may help remove slack from the seat belt in the event of further reduce the risk of injury in the event of a a collision.
  • Page 79 SAFETY carefully pull out only the amount of webbing WARNING! necessary to comfortably wrap around the occupant’s mid-section. Slide the latch plate Never install a rear-facing child restraint in  into the buckle until you hear a "click." the front seat of a vehicle. Only use a rear-facing child restraint in the rear seat.

  • Page 80: Supplemental Restraint Systems (Srs)

    SAFETY How To Disengage The Automatic Locking Mode Front and Side Impact Sensors UPPLEMENTAL ESTRAINT YSTEMS  (SRS) Seat Belt Pretensioners Unbuckle the combination lap/shoulder belt  and allow it to retract completely to disengage Air Bag Warning Light Some of the safety features described in this the Automatic Locking Mode and activate the section may be standard equipment on some The Occupant Restraint Controller...
  • Page 81 SAFETY The ORC also includes diagnostics that will WARNING! illuminate the instrument panel Air Bag Warning Light if a malfunction is detected that could Ignoring the Air Bag Warning Light in your affect the air bag system. The diagnostics also instrument panel could mean you won’t have record the nature of the malfunction.
  • Page 82 SAFETY Front Air Bag Operation WARNING! WARNING! Front Air Bags are designed to provide No objects should be placed over or near Never place a rear-facing child restraint in   additional protection by supplementing the seat the air bag on the instrument panel or front of an air bag.
  • Page 83 SAFETY When the ORC detects a collision requiring the Supplemental Side Air Bag Inflatable Curtains front air bags, it signals the inflator units. A large (SABICs) quantity of non-toxic gas is generated to inflate This vehicle is equipped with Supplemental the front air bags.
  • Page 84 SAFETY SABICs may help reduce the risk of head and The system is calibrated to deploy the Side Air WARNING! other injuries to front and rear seat outboard Bags on the impact side of the vehicle during occupants in certain side impacts, in addition to impacts that require Side Air Bag occupant Do not mount equipment, or stack luggage ...
  • Page 85 SAFETY Rollover Events WARNING! WARNING! Side Air Bags and seat belt pretensioners are Occupants, including children, who are up Side Air Bags need room to inflate. Do not   designed to activate in certain rollover events. against or very close to Side Air Bags can be lean against the door or window.
  • Page 86 SAFETY Air Bag System Components If you do have a collision which deploys the air Do not drive your vehicle after the air bags have bags, any or all of the following may occur: deployed. If you are involved in another NOTE: collision, the air bags will not be in place to The air bag material may sometimes cause...
  • Page 87 SAFETY Fuel Cut Off Switch If there are no fuel leaks or damage to the WARNING! vehicle electrical devices (e.g. headlights) after Your vehicle is equipped with a Fuel Cut Off an accident, reset the Fuel Cut Off Switch by If, after an accident, you smell fuel or see switch.
  • Page 88 SAFETY Event Data Recorder (EDR) These data can help provide a better WARNING! understanding of the circumstances in which This vehicle is equipped with an Event Data crashes and injuries occur. It is dangerous to try to repair any part of ...

  • Page 89: Child Restraints

    SAFETY There are different sizes and types of restraints Before buying any restraint system, make sure HILD ESTRAINTS for children from newborn size to the child that it has a label certifying that it meets all Everyone in your vehicle needs to be buckled up almost large enough for an adult safety belt.
  • Page 90 SAFETY Summary Of Recommendations For Restraining Children In Vehicles Child Size, Height, Weight Or Age Recommended Type Of Child Restraint Children who are two years old or younger and Either an Infant Carrier or a Convertible Child Infants and Toddlers who have not reached the height or weight limits Restraint, facing rearward in a rear seat of the of their child restraint...
  • Page 91 SAFETY Children should remain in a forward-facing child WARNING! WARNING! seat with a harness for as long as possible, up to the highest weight or height allowed by the Never place a rear-facing child restraint in After a child restraint is installed in the ...
  • Page 92 SAFETY Children Too Large For Booster Seats A child’s squirming or slouching can move the If you must carry a child in a forward-facing child belt out of position. If the shoulder belt contacts restraint, the passenger seat should be moved Children who are large enough to wear the the face or neck, move the child closer to the to the full rearward position and the child must...
  • Page 93 SAFETY Refer to the “Automatic Locking Mode” WARNING! description in “Switchable Automatic Locking Retractors (ALR)” under “Occupant Restraint Improper installation or failure to properly  Systems” for additional information on ALR. secure a child restraint can lead to failure of the restraint. The child could be badly injured or killed.

  • Page 94: Transporting Pets

    SAFETY Installing A Child Restraint With A 3. Slide the latch plate into the buckle until you 8. Test that the child restraint is installed hear a “click.” tightly by pulling back and forth on the child Switchable Automatic Locking Retractor seat at the belt path.

  • Page 95: Safety Tips

    SAFETY SAFETY TIPS The best protection against carbon monoxide XHAUST entry into the vehicle body is a properly RANSPORTING ASSENGERS maintained engine exhaust system. WARNING! Whenever a change is noticed in the sound of NEVER TRANSPORT PASSENGERS IN THE Exhaust gases can injure or kill. They contain the exhaust system, when exhaust fumes can CARGO AREA.

  • Page 96: Safety Checks You Should Make Inside The Vehicle

    SAFETY If the light comes on intermittently or remains AFETY HECKS HOULD WARNING! on while driving, have an authorized dealer NSIDE EHICLE service the vehicle immediately. An improperly attached, damaged, folded, or Seat Belts stacked floor mat, or damaged floor mat Refer to “Occupant Restraint Systems”...

  • Page 97: Outside The Vehicle

    SAFETY ERIODIC AFETY HECKS HOULD WARNING! WARNING! UTSIDE EHICLE ONLY install floor mats designed to fit your ALWAYS make sure objects cannot fall or   Tires vehicle. NEVER install a floor mat that slide into the driver’s side floor area when cannot be properly attached and secured to the vehicle is moving.

  • Page 98: Starting And Operating

    STARTING AND OPERATING STARTING THE ENGINE UTOMATIC RANSMISSION EATHER PERATION –22°F O −30°C) ELOW The gear selector must be in the PARK or Before starting your vehicle, adjust your seat, NEUTRAL position before you can start the adjust both inside and outside mirrors, and To ensure reliable starting at these engine.

  • Page 99: After Starting

    STARTING AND OPERATING CAUTION! WARNING! WARNING! To prevent damage to the starter, do not Never pour fuel or other flammable liquid Remember to disconnect the engine block  into the throttle body air inlet opening in an continuously crank the engine for more than heater cord before driving.

  • Page 100: Parking Brake

    STARTING AND OPERATING PARKING BRAKE The engine oil installed in the engine at the When the parking brake is applied with the factory is a high-quality energy conserving type ignition switch in the MAR (ACC/ON/RUN) Before leaving the vehicle, make sure that the lubricant.

  • Page 101: Automatic Transmission

    STARTING AND OPERATING AUTOMATIC TRANSMISSION WARNING! WARNING! WARNING! Do not leave the key fob in or near the When leaving the vehicle, always remove   vehicle, or in a location accessible to chil- the ignition key from the vehicle and lock It is dangerous to shift out of PARK or ...

  • Page 102: Key Ignition Park Interlock

    STARTING AND OPERATING NOTE: PEED UTOMATIC RANSMISSION CAUTION! If a malfunction occurs, the system will trap the The transmission gear position display (located key in the ignition to warn you that this safety Shift into or out of PARK or REVERSE only ...
  • Page 103 STARTING AND OPERATING In ERS mode, toggling the gear selector forward PARK (P) (-) or rearward (+) will change the highest This range supplements the parking brake by available gear. Refer to "Electronic Range locking the transmission. The engine can be Select (ERS) Operation"...
  • Page 104 STARTING AND OPERATING WARNING! WARNING! WARNING! Never use the PARK position as a substi- Unintended movement of a vehicle could Do not leave the ignition key in or near the    tute for the parking brake. Always apply the injure those in or near the vehicle.
  • Page 105 STARTING AND OPERATING DRIVE (D) WARNING! CAUTION! This range should be used for most city and Do not coast in NEUTRAL and never turn off Before moving the transmission gear  highway driving. It provides the smoothest selector out of PARK, you must turn the igni- the ignition to coast down a hill.
  • Page 106 STARTING AND OPERATING During cold temperatures, transmission The Malfunction Indicator Light (MIL) may be If the transmission cannot be reset, authorized operation may be modified depending on illuminated. Transmission Limp Home Mode dealer service is required. engine and transmission temperature as well allows the vehicle to be driven to an authorized Electronic Range Select (ERS) Operation as vehicle speed.
  • Page 107 STARTING AND OPERATING WARNING! Do not downshift for additional engine braking on a slippery surface. The drive wheels could lose their grip and the vehicle could skid, causing a collision or personal injury. Instrument Cluster Display Actual Gear(s) 1–2 1–3 1–4 1–5 1–6...

  • Page 108: Power Steering

    STARTING AND OPERATING POWER STEERING When To Use TOW/HAUL Mode operation in the upper gears. When the vehicle speed drops or during some accelerations, the When driving in hilly areas, towing a trailer, The standard power steering system will give clutch automatically disengages.

  • Page 109: Power Steering Fluid Check

    STARTING AND OPERATING CAUTION! CAUTION! Prolonged operation of the steering system at Do not use chemical flushes in your power the end of the steering wheel travel will steering system as the chemicals can increase the steering fluid temperature and it damage your power steering components.

  • Page 110: To Activate

    STARTING AND OPERATING NOTE: Metric Speed (km/h) CTIVATE The vehicle should be traveling at a steady Tapping the Speed Control lever up SET (+)  Rotate the center ring upward on the Speed speed and on level ground before moving the once will result in a 1 km/h increase in set Control lever to turn the system on.

  • Page 111: To Accelerate For Passing

    STARTING AND OPERATING U.S. Speed (mph) CCELERATE ASSING WARNING! Tapping the Speed Control lever down (-)  Press the accelerator as you would normally. Speed Control can be dangerous where the once will result in a 1 mph decrease in set When the pedal is released, the vehicle will system cannot maintain a constant speed.

  • Page 112: Parksense Rear Park Assist - If Equipped

    STARTING AND OPERATING PARKSENSE REAR PARK ASSIST — If several obstacles are detected, the ENSE SSIST ParkSense Rear Park Assist system indicates ENSORS IF EQUIPPED the nearest obstacle. The four ParkSense Rear Park Assist sensors, The ParkSense Rear Park Assist system The minimum height of a detectable obstacle located in the rear fascia/bumper, monitor the provides an audible indication of the distance...
  • Page 113 STARTING AND OPERATING Audible And Visual Signals Supplied By The ParkSense Rear Park Assist System SIGNAL MEANING INDICATION Audible Signal (dashboard loudspeaker) • Sound pulses emitted at a rate that increases as the distance decreases. • Emits continuous tone at 12 inches (30 cm). An obstacle is present within the sensors' field Obstacle Distance •...

  • Page 114: Parksense Rear Park Assist Failure Indications

    STARTING AND OPERATING Clean the Rear Park Assist sensors regularly, ENSE SSIST LEANING ENSE YSTEM  taking care not to scratch or damage them. AILURE NDICATIONS Clean the Rear Park Assist sensors with water, The sensors must not be covered with ice, car wash soap and a soft cloth.

  • Page 115: Parkview Rear Back Up Camera

    STARTING AND OPERATING PARKVIEW REAR BACK UP CAMERA WARNING! CAUTION! Your vehicle is equipped with the ParkView Rear Drivers must be careful when backing up ParkSense is only a parking aid and it is   Back Up Camera that allows you to see an even when using ParkSense.
  • Page 116 STARTING AND OPERATING When the vehicle is shifted out of REVERSE and/or when the rear doors are closed, the rear camera mode is exited and the navigation or audio screen appears again. When displayed, static grid lines will illustrate the width of the vehicle and will show separate zones that will help indicate the distance to the rear of the vehicle.

  • Page 117: Refueling The Vehicle

    STARTING AND OPERATING REFUELING THE VEHICLE WARNING! CAUTION! The gas cap is located behind the fuel filler door Never have any smoking materials lit in or A poorly fitting fuel filler cap may cause the   on the left side of the vehicle. If the gas cap is near the vehicle when the fuel door is open “Malfunction Indicator Light (MIL)”...

  • Page 118: Loose Fuel Filler Cap Message

    STARTING AND OPERATING OOSE ILLER ESSAGE EHICLE ERTIFICATION ABEL ROSS EHICLE EIGHT ATING (GVWR) If the vehicle diagnostic system determines that Your vehicle has a Vehicle Certification Label the fuel filler cap is loose, improperly installed, affixed to the drivers side B-Pillar or the rear of The Gross Vehicle Weight Rating (GVWR) is the or damaged, a “Check fuel cap”...

  • Page 119: Tire Size

    STARTING AND OPERATING VERLOADING OADING The tire size on the Vehicle Certification Label The load carrying components (axle, springs, To load your vehicle properly, first figure out its represents the actual tire size on your vehicle. tires, wheels, etc.) of your vehicle will provide empty weight, axle-by-axle and side-by-side.

  • Page 120: Trailer Towing

    STARTING AND OPERATING TRAILER TOWING Gross Combination Weight Rating (GCWR) WARNING! The Gross Combination Weight Rating (GCWR) In this section you will find safety tips and It is important that you do not exceed the is the total allowable weight of your vehicle and information on limits to the type of towing you maximum front or rear GAWR.
  • Page 121 STARTING AND OPERATING Trailer Sway Control Weight-Distributing Hitch WARNING! The Trailer Sway Control (TSC) can be a A weight-distributing system works by applying An improperly adjusted Weight Distributing  mechanical telescoping link that can be leverage through spring (load) bars. They are Hitch system may reduce handling, installed between the hitch receiver and the typically used for heavier loads to distribute...

  • Page 122: Trailer Hitch Classification

    STARTING AND OPERATING RAILER ITCH LASSIFICATION The following chart provides the industry standard for the maximum trailer weight a given trailer hitch class can tow and should be used to assist you in selecting the correct trailer hitch for your intended towing condition. Trailer Hitch Classification Definitions Class Max.

  • Page 123: Towing Requirements

    STARTING AND OPERATING Refer to the “Tire And Loading Information” CAUTION! WARNING! placard for the maximum combined weight of Always load a trailer with 60% of the weight in occupants and cargo for your vehicle. Make certain that the load is secured in the ...
  • Page 124 STARTING AND OPERATING Proper tire inflation pressures are essential An electronically actuated trailer brake   WARNING! to the safe and satisfactory operation of your controller is required when towing a trailer vehicle. Refer to “Tires” in “Servicing And with electronically actuated brakes. When Vehicles with trailers should not be parked ...

  • Page 125: Towing Tips

    STARTING AND OPERATING NOTE: CAUTION! Disconnect trailer wiring connector from the  If the trailer weighs more than 1,000 lbs (453 vehicle before launching a boat (or any other kg) loaded, it should have its own brakes and device plugged into vehicle’s electrical they should be of adequate capacity.
  • Page 126 STARTING AND OPERATING Automatic Transmission Towl/Haul Mode Cooling System The DRIVE range can be selected when towing. To reduce potential for automatic transmission To reduce potential for engine and transmission The transmission controls include a drive overheating, activate TOW/HAUL mode when overheating, take the following actions: strategy to avoid frequent shifting when towing.

  • Page 127: Recreational Towing (Behind Motorhome, Etc.)

    STARTING AND OPERATING RECREATIONAL TOWING (BEHIND MOTORHOME, ETC.) OWING EHICLE EHIND NOTHER EHICLE Towing Condition Wheels OFF the Ground Automatic Transmission Flat Tow NONE NOT ALLOWED Front Dolly Tow Rear NOT ALLOWED On Trailer NOTE: When towing your vehicle, always follow applicable state and provincial laws. Contact state and provincial Highway Safety offices for additional details. 3.

  • Page 128: Driving Tips

    STARTING AND OPERATING DRIVING TIPS Traction RIVING HROUGH ATER When driving on wet or slushy roads, it is Driving through water more than a few inches/ RIVING LIPPERY URFACES possible for a wedge of water to build up centimeters deep will require extra caution to between the tire and road surface.
  • Page 129 STARTING AND OPERATING Shallow Standing Water CAUTION! CAUTION! Although your vehicle is capable of driving Always check the depth of the standing Driving through standing water may cause   through shallow standing water, consider water before driving through it. Never drive damage to your vehicle’s drivetrain compo- the following Cautions and Warnings before through standing water that is deeper than...

  • Page 130: In Case Of Emergency

    IN CASE OF EMERGENCY HAZARD WARNING FLASHERS This is an emergency warning system and it When you must leave the vehicle to seek should not be used when the vehicle is in assistance, the Hazard Warning Flashers will The Hazard Warning Flashers switch is located motion.

  • Page 131: Bulb Replacement

    IN CASE OF EMERGENCY BULB REPLACEMENT EPLACEMENT ULBS Interior Bulbs Bulb Name Bulb Number Dome Lamp Courtesy Lamp FF500 Cargo Lamp Exterior Bulbs Bulb Name Bulb Number Front Low and High Beam Headlamp H7SLL Front Park/Turn Signal Lamps 7444NA Daytime Running Lamps (If Equipped) 7440 Front Side Marker Lamps Rear Tail/Stop Lamps...

  • Page 132: Replacing Exterior Bulbs

    IN CASE OF EMERGENCY Exterior Bulbs Bulb Name Bulb Number Front Roof Lamps WY5W Rear Roof Lamps NOTE: Numbers refer to commercial bulb types that can be purchased from an authorized dealer. If a bulb needs to be replaced, visit an authorized dealer. 7.
  • Page 133 IN CASE OF EMERGENCY 6. Rotate the bulb counterclockwise and 4. Remove two lower retaining screws from Front Fog Lamps remove. the headlamp housing. 1. Turn front wheels inboard to access cover 7. Install the bulb into socket, and rotate bulb/ 5.

  • Page 134: Replacing Interior Bulbs

    IN CASE OF EMERGENCY Rear Tail, Stop, Backup, Turn Signal And 5. Remove the tail/stop, turn signal, backup 2. Using a suitable tool, pull open the metal and rear side marker bulb/socket by bulb access on the back of the housing. Rear Side Marker Lamps rotating counterclockwise.

  • Page 135: Fuses

    IN CASE OF EMERGENCY FUSES 3. Remove and replace the bulbs as needed. WARNING! When replacing a blown fuse, always use  an appropriate replacement fuse with the same amp rating as the original fuse. Never replace a fuse with another fuse of higher amp rating.

  • Page 136: Underhood Fuses

    IN CASE OF EMERGENCY The ID number of the electrical component NDERHOOD USES corresponding to each fuse can be found on the The Front Power Distribution Center is located back of the cover. on the driver’s side of the engine compartment. To access the fuses, remove the cover.
  • Page 137 IN CASE OF EMERGENCY Cavity Maxi Fuse Mini Fuse Description 40 Amp Orange – Passenger Compartment Blower – 15 Amp Blue Rear Power Outlet – 15 Amp Blue Horn – 20 Amp Yellow Power Outlet – 7.5 Amp Brown USB Charger KL15 Shifter Transmission Module (STM) (3.6), KL15 –...
  • Page 138 IN CASE OF EMERGENCY Front PDC Additional Fuses The additional fuse box is located inside the front PDC Box. Front Power Distribution Center Additional Fuses Cavity Mini Fuse Description 20 Amp Yellow Vacuum Pump (3.6 Gasoline Engine) 30 Amp Green Transmission Power RELE (3.6 Gasoline Engine) 5 Amp Beige Shifter Transmission Module (STM) (3.6 Gasoline Engine)

  • Page 139: Interior Fuses

    IN CASE OF EMERGENCY NTERIOR USES The interior fuse panel is part of the Body Control Module (BCM) and is located on the driver's side under the instrument panel. Fuse Panel Fuse Panel Cavity Locations Cavity Mini Fuse Description 5 Amp Beige INT/A 7.5 Amp Brown Clearance Lights...

  • Page 140: Right Central Pillar Fuses

    IN CASE OF EMERGENCY Cavity Mini Fuse Description 5 Amp Beige +30 (IPC) + FTM 7.5 Amp Brown Left Fog Lamp 7.5 Amp Brown Right Fog Lamp IGHT ENTRAL ILLAR USES The right central pillar fuse panel is located on the interior side at the base of the passenger side B pillar.

  • Page 141: Jacking And Tire Changing

    IN CASE OF EMERGENCY JACKING AND TIRE CHANGING OCATION The jack and jack tools are stored under the WARNING! front passenger seat in a box, or next to or Do not attempt to change a tire on the side behind the driver seat in a tool bag. The box and ...

  • Page 142: Spare Tire Removal

    IN CASE OF EMERGENCY PARE EMOVAL 1. Remove the spare tire before attempting to jack up the vehicle. Attach the lug bolt adapter to the winch extension and insert it into the winch mechanism. Jacking Tools Winch Location 1 — Tow Eye The winch mechanism is located under the rear of the vehicle to the right of the spare 2 —...
  • Page 143 IN CASE OF EMERGENCY 2. Rotate the wheel wrench handle counter- 3. Pull the spare tire out from under the clockwise until the spare tire is on the vehicle to gain access to the spare tire ground with enough cable slack to allow you retainer.

  • Page 144: Preparations For Jacking

    IN CASE OF EMERGENCY REPARATIONS ACKING WARNING! 1. Park the vehicle on a firm, level surface. Apply the parking brake firmly and place an  Avoid ice or slippery areas. automatic transmission in PARK; a manual transmission in REVERSE. WARNING! Block the wheel diagonally opposite the ...
  • Page 145 IN CASE OF EMERGENCY 1. Loosen (but do not remove) the wheel lug NOTE: bolts by turning them counterclockwise The rear jacking location is located in front of one turn while the wheel is still on the the rear tire and in front of the leaf spring ground.
  • Page 146 IN CASE OF EMERGENCY NOTE: WARNING! The front jacking location is located behind the front tire and in front of the driver/passenger Raising the vehicle higher than necessary can door. make the vehicle less stable. It could slip off the jack and hurt someone near it. Raise the WARNING! vehicle only enough to remove the tire.

  • Page 147: Wheel Covers

    IN CASE OF EMERGENCY 9. Lower the jack to its fully-closed position. 13. Check the spare tire pressure as soon as WARNING! possible. Correct the tire pressure, as 10. Stow the damaged wheel/spare tire with To avoid the risk of forcing the vehicle off the required.

  • Page 148: Tire Service Kit - If Equipped

    IN CASE OF EMERGENCY TIRE SERVICE KIT — IF EQUIPPED Using The Mode Select Knob And Hoses ERVICE OMPONENTS PERATION Your Tire Service Kit is equipped with the Small punctures up to 1/4 inch (6 mm) in the following symbols to indicate the air or sealant tire tread can be sealed with Tire Service Kit.

  • Page 149: Tire Service Kit Usage Precautions

    IN CASE OF EMERGENCY Using The Deflation Button The Sealant Bottle (4) and Sealant Hose (3) Do not lift or carry the Tire Service Kit by the    are a one tire application use and need to be hoses.

  • Page 150: Sealinga Tire With Tire Service Kit

    IN CASE OF EMERGENCY (B) Setting Up To Use Tire Service Kit: EALING ERVICE WARNING! 1. Push in the Mode Select Knob (2) and turn (A) Whenever You Stop To Use Tire Service A loose Tire Service Kit thrown forward in a ...
  • Page 151 IN CASE OF EMERGENCY (C) Injecting Tire Service Kit Sealant Into If the sealant (white fluid) does not flow within If the sealant (white fluid) does flow through the 0 – 10 seconds through the Sealant Hose (3): Sealant Hose (3): The Deflated Tire: 1.
  • Page 152 IN CASE OF EMERGENCY If the tire does not inflate to at least 26 psi 3. Immediately disconnect the Sealant Hose WARNING! (1.8 Bar) pressure within 15 minutes: (3) from the valve stem, reinstall the cap on the fitting at the end of the hose, and place Tire Service Kit is not a permanent flat tire The tire is too badly damaged.
  • Page 153 IN CASE OF EMERGENCY If tire pressure is less than 19 psi (1.3 Bar): 4. Have the tire inspected and repaired or 3. Push and hold the Sealant Bottle release replaced at the earliest opportunity at an button, then pull out the bottle holding the The tire is too badly damaged.

  • Page 154: Jump Starting

    IN CASE OF EMERGENCY JUMP STARTING REPARATIONS TART WARNING! The vehicle’s jump starting remote posts are If your vehicle has a discharged battery, it can Take care to avoid the radiator cooling fan  located under the hood, in the engine be jump started using a set of jumper cables whenever the hood is raised.

  • Page 155: Jump Starting Procedure

    IN CASE OF EMERGENCY 3. If using another vehicle to jump start the Connecting The Jumper Cables WARNING! battery, park the vehicle within the jumper 1. Connect the positive (+) end of the jumper cables reach, apply the parking brake and Do not connect the jumper cable to the cable to the remote positive (+) post of the make sure the ignition is OFF.

  • Page 156: Battery Location

    IN CASE OF EMERGENCY 3. Disconnect the positive end (+) of the ATTERY OCATION jumper cable from the positive (+) post of There are two remote jump starting posts under the booster battery. the hood which is the recommended jump start 4.

  • Page 157: Gear Selector Override

    IN CASE OF EMERGENCY NOTE: 3. Using a small screwdriver or similar tool, CAUTION! There are steps that you can take to slow down remove the gear selector override access an impending overheat condition: Driving with a hot cooling system could cover which is located below the gear damage your vehicle.

  • Page 158: Freeing A Stuck Vehicle

    IN CASE OF EMERGENCY 5. Insert the screwdriver or similar tool into the Shift back and forth between DRIVE (D) and WARNING! access port, and push and hold the override REVERSE (R), while gently pressing the release lever forward. accelerator. Use the least amount of Fast spinning tires can be dangerous.

  • Page 159: Towing A Disabled Vehicle

    IN CASE OF EMERGENCY TOWING A DISABLED VEHICLE This section describes procedures for towing a disabled vehicle using a commercial towing service. Towing Condition Wheels OFF The Ground ALL Models Flat Tow NONE If transmission is operable: • Transmission in NEUTRAL •...

  • Page 160: Automatic Transmission

    IN CASE OF EMERGENCY ENHANCED ACCIDENT RESPONSE SYSTEM UTOMATIC RANSMISSION CAUTION! (EARS) The manufacturer recommends towing your Towing faster than 25 mph (40 km/h) or  vehicle with all four wheels OFF the ground farther than 15 miles (24 km) with front This vehicle is equipped with an Enhanced using a flatbed.

  • Page 161: Servicing And Maintenance

    SERVICING AND MAINTENANCE SCHEDULED SERVICING An authorized dealer will reset the oil change Severe Duty All Models indicator message after completing the Change Engine Oil at 4,000 miles (6,500 km) or Your vehicle is equipped with an automatic oil scheduled oil change. If a scheduled oil change 350 hours of engine run time if the vehicle is change indicator system.

  • Page 162: Maintenance Plan

    SERVICING AND MAINTENANCE AINTENANCE Required Maintenance Intervals Refer to the maintenance plan on the following pages for the required maintenance intervals. More frequent maintenance may be needed in severe conditions, such as dusty areas and very short trip driving. In some extreme conditions, additional maintenance not specified in the maintenance schedule may be required.
  • Page 163 SERVICING AND MAINTENANCE Mileage or time passed (whichever comes first) Or Years: Or Kilometers: Additional Inspections Inspect the CV/Universal joints. Inspect front suspension, tie rod ends, boot seals, and replace if necessary. Inspect the brake pads, replace as necessary.
  • Page 164 SERVICING AND MAINTENANCE Mileage or time passed (whichever comes first) Or Years: Or Kilometers: Additional Maintenance Replace the engine air filter. Inspect the cabin air filter, replace as necessary. Replace the Brake Fluid every two years. Replace the spark plugs. Flush and replace the engine coolant at 10 years or 150,000 miles (240,000 km)

  • Page 165: Heavy Duty Use Of The Vehicle

    SERVICING AND MAINTENANCE Mileage or time passed (whichever comes first) Or Years: Or Kilometers: Change the automatic transmission fluid and filter. Inspect and replace the PCV valve if necessary. 1. The brake fluid change interval is time based only, mileage intervals do not apply. 2.

  • Page 166: Engine Compartment

    SERVICING AND MAINTENANCE ENGINE COMPARTMENT 3.6L E NGINE 1 — Washer Fluid Reservoir 5 — Power Distribution Center (Fuses) 2 — Engine Oil Fill 6 — Coolant Reservoir 3 — Engine Oil Dipstick 7 — Power Steering Reservoir 4 — Brake Fluid Reservoir...

  • Page 167: Checking Oil Level - Gas Engine

    SERVICING AND MAINTENANCE — G HECKING EVEL NGINE DDING ASHER LUID AINTENANCE ATTERY To ensure proper lubrication of your vehicle's The fluid reservoir is located in the engine Your vehicle is equipped with a engine, the engine oil must be maintained at compartment and should be checked at regular maintenance-free battery.

  • Page 168: Pressure Washing

    SERVICING AND MAINTENANCE DEALER SERVICE NGINE CAUTION! Change Engine Oil An authorized dealer has the qualified service It is essential when replacing the cables on  personnel, special tools, and equipment to the battery that the positive cable is The oil change indicator system will remind you perform all service operations in an expert attached to the positive post and the nega- that it is time to take your vehicle in for...
  • Page 169 SERVICING AND MAINTENANCE American Petroleum Institute (API) Engine The engine oil filler cap also shows the Synthetic engine oils which do not have both the recommended engine oil viscosity for your engine oil certification mark and the correct SAE Oil Identification Symbol engine.

  • Page 170: Engine Oil Filter

    SERVICING AND MAINTENANCE NGINE ILTER ONDITIONER AINTENANCE WARNING! The engine oil filter should be replaced with a For best possible performance, your air The air induction system (air cleaner, hoses, new filter at every engine oil change. conditioner should be checked and serviced by etc.) can provide a measure of protection in an authorized dealer at the start of each warm Engine Oil Filter Selection...
  • Page 171 SERVICING AND MAINTENANCE Refrigerant Recovery And Recycling The cabin air filter is located in the fresh air inlet WARNING! in the engine compartment. Perform the R-134a Air Conditioning Refrigerant is a following procedure to replace the filter: The air conditioning system contains refrig- ...

  • Page 172: Body Lubrication

    SERVICING AND MAINTENANCE 2. Remove and replace the cabin air filter from UBRICATION INDSHIELD IPER LADES the filter retainer. Locks and all body pivot points, including such Clean the rubber edges of the wiper blades and items as seat tracks, door hinge pivot points the windshield periodically with a sponge or soft and rollers, liftgate, tailgate, decklid, sliding cloth and a mild nonabrasive cleaner.

  • Page 173: Exhaust System

    SERVICING AND MAINTENANCE XHAUST YSTEM WARNING! CAUTION! The best protection against carbon monoxide Exhaust gases can injure or kill. They Damage to the catalytic converter can   entry into the vehicle body is a properly contain carbon monoxide (CO), which is result if your vehicle is not kept in proper maintained engine exhaust system.

  • Page 174: Cooling System

    SERVICING AND MAINTENANCE In unusual situations involving grossly Coolant Checks OOLING YSTEM malfunctioning engine operation, a scorching Check the engine coolant (antifreeze) odor may suggest severe and abnormal catalyst WARNING! protection every 12 months (before the onset of overheating. If this occurs, stop the vehicle, turn freezing weather, where applicable).
  • Page 175 SERVICING AND MAINTENANCE If the engine coolant (antifreeze) is dirty or Do not use water alone or alcohol-based is important that you use the same engine  contains visible sediment, have an authorized engine coolant (antifreeze) products. Do not coolant (OAT coolant conforming to MS.90032) use additional rust inhibitors or antirust prod- dealer clean and flush with OAT coolant throughout the life of your vehicle.
  • Page 176 SERVICING AND MAINTENANCE NOTE: Cooling System Pressure Cap Disposal Of Used Coolant It is the owner's responsibility to maintain the The cap must be fully tightened to prevent loss Used ethylene glycol-based coolant (antifreeze)  proper level of protection against freezing of engine coolant (antifreeze), and to ensure is a regulated substance requiring proper according to the temperatures occurring in...

  • Page 177: Brake System

    SERVICING AND MAINTENANCE Points To Remember If frequent engine coolant (antifreeze) addi- RAKE YSTEM  tions are required, the cooling system should In order to ensure brake system performance, NOTE: be pressure tested for leaks. all brake system components should be When the vehicle is stopped after a few miles/ Maintain engine coolant (antifreeze) concen- ...

  • Page 178: Automatic Transmission

    SERVICING AND MAINTENANCE If necessary, add fluid to bring level within the UTOMATIC RANSMISSION WARNING! designated marks on the side of the reservoir of (3.6L G ASOLINE NGINE the brake master cylinder. Be sure to clean the To avoid contamination from foreign matter ...

  • Page 179: Raising The Vehicle

    SERVICING AND MAINTENANCE Special Additives Fluid Level Check Fluid And Filter Changes The manufacturer strongly recommends The fluid level is preset at the factory and does Refer to the “Maintenance Plan” in this section against using any special additives in the not require adjustment under normal operating for the proper maintenance intervals.
  • Page 180 SERVICING AND MAINTENANCE Tire Markings NOTE: Temporary spare tires are designed for  temporary emergency use only. Temporary P (Passenger) — Metric tire sizing is based on  high pressure compact spare tires have the US design standards. P-Metric tires have the letter “T”...
  • Page 181 SERVICING AND MAINTENANCE TIRE SIZING CHART EXAMPLE: Example Size Designation: P215/65R15XL 95H, 215/65R15 96H, LT235/85R16C, T145/80D18 103M, 31x10.5 R15 LT P = Passenger car tire size based on US design standards, or "..blank.." = Passenger car tire based on European design standards, or LT = Light truck tire based on US design standards, or T or S = Temporary spare tire or 31 = Overall diameter in inches (in)
  • Page 182 SERVICING AND MAINTENANCE EXAMPLE: Service Description: 95 = Load Index A numerical code associated with the maximum load a tire can carry  H = Speed Symbol A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions ...
  • Page 183 SERVICING AND MAINTENANCE Tire Identification Number (TIN) The TIN may be found on one or both sides of the tire; however, the date code may only be on one side. Tires with white sidewalls will have the full TIN, including the date code, located on the white sidewall side of the tire. Look for the TIN on the outboard side of black sidewall tires as mounted on the vehicle.
  • Page 184 SERVICING AND MAINTENANCE Tire Terminology And Definitions Term Definition B-Pillar The vehicle B-Pillar is the structural member of the body located behind the front door. Cold tire inflation pressure is defined as the tire pressure after the vehicle has not been driven for at least three hours, or driven less than 1 mile (1.6 km) after sitting for a Cold Tire Inflation Pressure minimum of three hours.
  • Page 185 SERVICING AND MAINTENANCE Tire Loading And Tire Pressure This placard tells you important information about the: NOTE: 1. Number of people that can be carried in The proper cold tire inflation pressure is listed the vehicle. on the driver’s side B-Pillar or the rear edge of the driver's side door.
  • Page 186 SERVICING AND MAINTENANCE For further information on GAWRs, vehicle (3) Subtract the combined weight of the Metric Example For Load Limit loading, and trailer towing, refer to “Vehicle driver and passengers from XXX kg or For example, if “XXX” amount equals 635 kg Loading”...
  • Page 187 SERVICING AND MAINTENANCE...

  • Page 188: Tires - General Information

    SERVICING AND MAINTENANCE Safety Both underinflation and overinflation affect the WARNING! stability of the vehicle and can produce a feeling WARNING! of sluggish response or over responsiveness in Overloading of your tires is dangerous. the steering. Overloading can cause tire failure, affect Improperly inflated tires are dangerous and ...
  • Page 189 SERVICING AND MAINTENANCE Tire Inflation Pressures The cold tire inflation pressure must not exceed Tire Pressures For High Speed Operation the maximum inflation pressure molded into The proper cold tire inflation pressure is listed The manufacturer advocates driving at safe the tire sidewall.
  • Page 190 SERVICING AND MAINTENANCE Radial Ply Tires Replace the tire pressure sensor as well as it is Tire Spinning not designed to be reused. When stuck in mud, sand, snow, or ice WARNING! Run Flat Tires — If Equipped conditions, do not spin your vehicle's wheels Combining radial ply tires with other types of above 30 mph (48 km/h) or for longer than Run Flat tires allow you the capability to drive...
  • Page 191 SERVICING AND MAINTENANCE Life Of Tire NOTE: Wheel Valve Stem must be replaced as well The service life of a tire is dependent upon when installing new tires due to wear and tear varying factors including, but not limited to: in existing tires.

  • Page 192: Tire Types

    SERVICING AND MAINTENANCE See the Tire Sizing Chart example found in the WARNING! WARNING! “Tire Safety Information” section of this manual for more information relating to the Load Index Do not use a tire, wheel size, load rating, or Failure to equip your vehicle with tires ...

  • Page 193: Spare Tires - If Equipped

    SERVICING AND MAINTENANCE — I Summer Or Three Season Tires — Snow Tires PARE IRES QUIPPED If Equipped Some areas of the country require the use of NOTE: snow tires during the Winter. Snow tires can be Summer tires provide traction in both wet and For vehicles equipped with Tire Service Kit identified by a “mountain/snowflake”...
  • Page 194 SERVICING AND MAINTENANCE Spare Tire Matching Original Equipped Tire Since this tire has limited tread life, the original Collapsible Spare Tire — If Equipped equipment tire should be repaired (or replaced) And Wheel — If Equipped The collapsible spare is for temporary and reinstalled on your vehicle at the first emergency use only.

  • Page 195: Wheel And Wheel Trim Care

    SERVICING AND MAINTENANCE NOTE: WARNING! WARNING! This spare tire may not have a tire pressure Compact and Collapsible spares are for monitor sensor. Limited use spares are for emergency use temporary emergency use only. With these only. Installation of this limited use spare tire Limited Use Spare —...
  • Page 196 SERVICING AND MAINTENANCE Your wheels are susceptible to deterioration When cleaning extremely dirty wheels including NOTE: caused by salt, sodium chloride, magnesium excessive brake dust, care must be taken in the If you intend parking or storing your vehicle for chloride, calcium chloride, etc., and other road selection of tire and wheel cleaning chemicals an extended period after cleaning the wheels...

  • Page 197: Tire Chains And Traction Devices

    SERVICING AND MAINTENANCE HAINS RACTION EVICES WARNING! CAUTION! Use of traction devices require sufficient Using tires of different size and type (M+S, Install device as tightly as possible and  tire-to-body clearance. Due to limited clearance Snow) between front and rear axles can then retighten after driving about ½...

  • Page 198: Tire Rotation Recommendations

    SERVICING AND MAINTENANCE All passenger vehicle tires must conform OTATION ECOMMENDATIONS to Federal safety requirements in The tires on the front and rear of your vehicle addition to these grades. operate at different loads and perform different steering, driving, and braking functions. For READWEAR these reasons, they wear at unequal rates.

  • Page 199: Traction Grades

    SERVICING AND MAINTENANCE STORING THE VEHICLE Sustained high temperature can cause RACTION RADES the material of the tire to degenerate The Traction grades, from highest to If you are storing your vehicle for more than and reduce tire life, and excessive lowest, are AA, A, B, and C.

  • Page 200: Body And Underbody Maintenance

    SERVICING AND MAINTENANCE Outside parking, which exposes your vehicle to NDERBODY AINTENANCE RESERVING ODYWORK airborne contaminants, road surfaces on which Cleaning Headlights Washing the vehicle is operated, extreme hot or cold weather, and other extreme conditions will have Your vehicle is equipped with plastic headlights Wash your vehicle regularly.

  • Page 201: Interiors

    SERVICING AND MAINTENANCE If you carry special cargo such as chemicals, Stain Repel Fabric Cleaning Procedure —  CAUTION! fertilizers, de-icer salt, etc., be sure that such If Equipped materials are well packaged and sealed. Do not use abrasive or strong cleaning ...

  • Page 202: Plastic And Coated Parts

    SERVICING AND MAINTENANCE Seat Belt Maintenance 1. Clean with a wet soft cloth. A mild soap LASTIC OATED ARTS solution may be used, but do not use high Do not bleach, dye or clean the belts with Use Mopar Total Clean to clean vinyl upholstery. alcohol content or abrasive cleaners.

  • Page 203: Glass Surfaces

    SERVICING AND MAINTENANCE NOTE: Cleaning LASS URFACES If equipped with light colored leather, it tends to The liner is top shelf dishwasher safe, or you All glass surfaces should be cleaned on a show any foreign material, dirt, and fabric dye may follow the cleaning procedure below.

  • Page 204: Technical Specifications

    TECHNICAL SPECIFICATIONS IDENTIFICATION DATA BRAKE SYSTEM WHEEL AND TIRE TORQUE SPECIFICATIONS Your vehicle is equipped with dual hydraulic Proper lug nut/bolt torque is very important to EHICLE DENTIFICATION UMBER brake systems. If either of the two hydraulic ensure that the wheel is properly mounted to The Vehicle Identification Number (VIN) is found systems loses normal capability, the remaining the vehicle.

  • Page 205: Fuel Requirements

    TECHNICAL SPECIFICATIONS FUEL REQUIREMENTS Inspect the wheel mounting surface prior to mounting the tire and remove any corrosion or 3.6L E loose particles. NGINE This engine is designed to meet all emissions regulations and provide optimum fuel economy and performance when using high quality unleaded “Regular”...

  • Page 206: Reformulated Gasoline

    TECHNICAL SPECIFICATIONS Poor quality gasoline can cause problems such ATERIALS DDED ASOLINE XYGENATE LENDS as hard starting, stalling, and hesitations. If you Besides using unleaded gasoline with the Some fuel suppliers blend unleaded gasoline experience these symptoms, try another brand proper octane rating, gasolines that contain with oxygenates such as ethanol.

  • Page 207: Do Not Use E-85 In Non-Flex Fuel Vehicles

    TECHNICAL SPECIFICATIONS E-85 I CNG A LP F MMT I YSTEM ASOLINE EHICLES ODIFICATIONS Methylcyclopentadienyl Manganese Tricarbonyl (MMT) is a manganese-containing metallic Non-Flex Fuel Vehicles (FFV) are compatible Modifications that allow the engine to run on additive that is blended into some gasoline to with gasoline containing up to 15% ethanol Compressed Natural Gas (CNG) or Liquid increase octane.

  • Page 208: Fuel System Cautions

    TECHNICAL SPECIFICATIONS YSTEM AUTIONS ARBON ONOXIDE ARNINGS CAUTION! The use of fuel additives, which are now CAUTION! WARNING!  being sold as octane enhancers, is not Follow these guidelines to maintain your Carbon monoxide (CO) in exhaust gases is recommended. Most of these products vehicle’s performance: deadly.

  • Page 209: Fluid Capacities

    TECHNICAL SPECIFICATIONS FLUID CAPACITIES Metric Fuel (Approximate) 24 Gallons 90 Liters Engine Oil With Filter 3.6L Engine (SAE 5W-20, API 6 Quarts 5.6 Liters Certified) Cooling System * 3.6L Engine (Mopar Antifreeze/ Engine Coolant 10 Year/150,000 10.5 Quarts 10 Liters Mile Formula or equivalent)

  • Page 210: Fluids And Lubricants

    TECHNICAL SPECIFICATIONS FLUIDS AND LUBRICANTS NGINE Component Fluid, Lubricant, or Genuine Part We recommend you use Mopar Antifreeze/Coolant 10 Year/150,000 Mile Formula OAT (Organic Additive Engine Coolant Technology) meeting the requirements of FCA Material Standard MS.90032. We recommend you use API Certified SAE 5W-20 Engine Oil, meeting the requirements of FCA Material Engine Oil Standard MS-6395 such as Mopar, Pennzoil, and Shell Helix.

  • Page 211: Chassis

    TECHNICAL SPECIFICATIONS HASSIS Component Fluid, Lubricant, Or Genuine Part Use Only ATF+4 Automatic Transmission Fluid. Failure to use ATF+4 fluid may affect the function or Automatic Transmission performance of your transmission. We recommend Mopar ATF+4 Fluid. We recommend you use Mopar DOT 4. Brake Master Cylinder DOT 4 brake fluid must be changed every two years regardless of mileage.

  • Page 212: Multimedia

    MULTIMEDIA CYBERSECURITY The risk of unauthorized and unlawful access to NOTE: your vehicle systems may still exist, even if the FCA US LLC or your dealer may contact you  Your vehicle may be a connected vehicle and most recent version of vehicle software (such as directly regarding software updates.

  • Page 213: Uconnect Settings

    MULTIMEDIA Privacy of any wireless and wired NOTE: communications cannot be assured. Third Only one category may be selected at a time.  parties may unlawfully intercept information The Back Arrow will change into a Done  and private communications without your button if any changes are made.
  • Page 214 MULTIMEDIA Display After pressing the Display button on the touchscreen, the following settings will be available: Setting Name Selectable Options Display Mode Auto Manual Display Brightness With Headlights Up Arrow Button Down Arrow Button ON — If Equipped NOTE: This feature is only available in Manual Display Mode. Display Brightness With the Up Arrow Button Down Arrow Button...
  • Page 215 MULTIMEDIA Units — If Equipped After pressing the Units button on the touchscreen, the following settings will be available: Setting Name Selectable Options Units Metric Custom NOTE: The “Custom” option allows you to set the “Distance” (mi, or km), “Fuel Consumption” [MPG (US), MPG (UK), L/100 km, or km/L] (if equipped), and “Temperature”...
  • Page 216 MULTIMEDIA Clock & Date After pressing the Clock & Date button on the touchscreen, the following settings will be available: Setting Name Selectable Options Set Time And Format — If Equipped Show Time Status — If Equipped Set Date Month Year NOTE: By selecting this setting, the day and month can be updated.
  • Page 217 MULTIMEDIA Safety/Assistance — If Equipped After pressing the Safety/Assistance button on the touchscreen, the following settings will be available: Setting Name Selectable Options ParkView Backup Camera Delay NOTE: The “ParkView Backup Camera Delay” setting determines whether or not the screen will display the rear view image for up to 10 seconds after the vehicle is shifted out of REVERSE.
  • Page 218 MULTIMEDIA Doors & Locks After pressing the Doors & Locks button on the touchscreen, the following settings will be available: Setting Name Selectable Options Auto Door Locks NOTE: When this feature is selected, all doors will lock automatically when the vehicle reaches a speed of 12 mph (20 km/h). Horn w/ Lock 1st Press 2nd Press...
  • Page 219 MULTIMEDIA Audio After pressing the Audio button on the touchscreen, the following settings will be available: Setting Name Selectable Options Equalizer – NOTE: When in this display, you may adjust the “Bass”, “Mid”, and “Treble” settings. Adjust the settings with the + and – setting buttons on the touchscreen or by selecting any point on the scale between the + and –...
  • Page 220 MULTIMEDIA Setting Name Selectable Options Auto-On Radio — If Equipped Recall Last NOTE: Press the Auto-On Radio button on the touchscreen to set how the radio behaves when the ignition is switched to ON/RUN. AUX Volume Offset — If Equipped –...
  • Page 221 MULTIMEDIA SiriusXM® Setup — If Equipped After pressing the SiriusXM® Setup button on the touchscreen, the following settings will be available: Setting Name Selectable Options Tune Start NOTE: The “Tune Start” feature begins playing the current song from the beginning when you tune to a music channel using one of the 12 presets, so you can enjoy the complete song.
  • Page 222 MULTIMEDIA Restore Settings — If Equipped After pressing the Restore Settings button on the touchscreen, the following settings will be available: Setting Name Selectable Options Restore Settings to Default NOTE: When this feature is selected, it will reset the Display, Clock, Audio, and Radio Settings to their default settings. Once the settings are restored, a pop-up appears stating “settings reset to default”.

  • Page 223: Safety And General Information

    MULTIMEDIA SAFETY AND GENERAL INFORMATION Glance at the screen only when safe to do so. NOTE:  If prolonged viewing of the screen is required, Many features of this system are speed depen- park in a safe location and set the parking AFETY UIDELINES dent.

  • Page 224: Uconnect 3/3 Nav With 5-Inch Display

    MULTIMEDIA UCONNECT 3/3 NAV WITH 5-INCH DISPLAY Care And Maintenance NOTE: If equipped, your Uconnect radio may have a CD Touchscreen player. NTRODUCTION CONNECT Do not press the touchscreen with any hard  3/3 NAV W ISPLAY YSTEM or sharp objects (pen, USB stick, jewelry, WARNING! etc.), which could scratch the touchscreen There are a few quick ways for you to identify your...
  • Page 225 MULTIMEDIA 1 — SETTINGS 6 — NAV or COMPASS 11 — SCREEN ON/OFF Push the settings button to access the Uconnect Push the NAV button on the faceplate to display Push the SCREEN ON/OFF button on the faceplate setting features. the current direction of the vehicle.

  • Page 226: Radio Mode

    MULTIMEDIA The radio is equipped with the following modes: Seek Functions ADIO Operating Radio Mode  Seek Up AM (SW/LW/MW) – If Equipped  Press and release the Seek Up button on the SiriusXM® Radio – If Equipped touchscreen to tune the radio to the next ...
  • Page 227 MULTIMEDIA Press the available number button to begin NHL® game, every NASCAR® race, Martha Fast Seek Down selecting a desired station. Once a number has Stewart and more. And get 20+ extra channels, Press and hold the Seek Down button on the been entered, any numbers that are no longer including SiriusXM®...
  • Page 228 MULTIMEDIA This functionality is only available for radios When you are receiving a station that you wish 1. Push the Settings button located on the equipped with a Satellite receiver. To receive to commit into memory, press and hold the faceplate.

  • Page 229: Media Mode

    MULTIMEDIA Speed Adjustable AUX Volume Offset Songs  Press the Speed Adjusted Volume button to Press the AUX Volume Offset button on the Playlists  select between OFF, 1, 2 or 3. This will increase touchscreen to activate the AUX Volume Offset Folders ...
  • Page 230 MULTIMEDIA Audio Inserting USB Device Fast Seek Down Gently insert the USB/device into the USB Port. Refer to “Operating Radio Mode” in this section Press and hold the Left Arrow button on the for the adjustable audio settings. If you insert a USB device with the ignition ON, touchscreen and the desired mode will begin to the unit will switch to USB mode and begin to rewind through the current track until the...

  • Page 231: Phone Mode

    MULTIMEDIA Before proceeding, the Bluetooth® device must Inserting Auxiliary Device HONE be paired with the Uconnect Phone to Gently insert the Auxiliary device cable into the Operating Phone Mode communicate with the Uconnect system. AUX Port. If you insert a Auxiliary device with the See the pairing procedure within this manual.
  • Page 232 MULTIMEDIA The Uconnect Phone is a voice-activated, Main Functions Connecting/Disconnecting A Mobile hands-free, in-vehicle communications system Phone Or Bluetooth® Device The buttons on the display can be used to: with Voice Command Capability. Refer to Compose phone numbers (using the graphic PAIRING A PHONE ...
  • Page 233 MULTIMEDIA 4. Press the Yes button to start the pairing NOTE: For further details, refer to your mobile phone procedure search for the Uconnect device owner's handbook. The priority is determined according to the  on the mobile phone. If No is selected the order of connection for mobile phones which NOTE: Phone main screen is displayed.
  • Page 234 MULTIMEDIA DISCONNECTION NOTE: This downloaded phonebook cannot be  edited or deleted on the Uconnect Phone. To disconnect a specific mobile phone or If supported, the download and update begin  These can only be edited on the mobile Bluetooth® audio device, proceed as follows: as soon as the Bluetooth®...
  • Page 235 MULTIMEDIA Recent Calls Answering An Incoming Call Answering Or Ignoring An Incoming Call With A Call Currently In Progress The list of the last calls made for each of the Call Controls following call types can be displayed: When an incoming call rings or is announced on The buttons on the display allow the following Uconnect, push the Answer button on the Calls received...

  • Page 236: Navigation Mode - If Equipped

    MULTIMEDIA — I Uconnect Phone Features SMS Message Reader Activation/Deactivation AVIGATION QUIPPED The SMS message automatic reading function Operating Navigation Mode — If Equipped MUTE/UNMUTE can be activated/deactivated by pressing the 1. During a call, push the Voice Recognition corresponding button on the display, which is PLANNING A ROUTE (VR) button on the steering wheel.
  • Page 237 MULTIMEDIA Near Me: Select this option to search with NOTE:  your current GPS location as the search By default, the current map is searched. Once center. The results are ranked by you have used search, the last search type you distance.
  • Page 238 MULTIMEDIA Planning A Route — Searching For A City Center NOTE: The city center location is shown on the map. When planning a route to a city center, you can 4. Select Drive. search for a town, city or postal code. 1.
  • Page 239 MULTIMEDIA Planning A Route — Searching For A POI 5. To plan a route to this destination, select the drive button. You can search for a POI type, such as a restaurant or tourist attraction. Alternatively, Planning A Route Using The Map you can search for a specific POI.
  • Page 240 MULTIMEDIA Planning A Route Using My Places Finding A Parking Lot 3. To plan a route to your chosen parking lot, select the drive button. 1. Select the Main Menu button to open the 1. Press the Parking button from the Main Menu.
  • Page 241 MULTIMEDIA 3. Select a gas station from the map or the list. CURRENT ROUTE MENU Avoid Blocked Road By opening the pop-up menu, you can add Clear Route Press the button to avoid an unexpected the gas station as a stop on your route. You obstacle that is blocking the road on your route.
  • Page 242 MULTIMEDIA Avoid Part Of Route Show Instructions You route will be recalculated to include your stop. Press the button to avoid part of the current Press the button to see a list of turn-by-turn Change Route Type route. instructions for your planned route. You are shown a list of the sections that make The instructions include the following Press the...
  • Page 243 MULTIMEDIA NOTE: For example, to switch to 2D view, you can say NOTE: You can also delete stops from your route by “2D view.” Press the Help button in the Main menu then pressing the Edit Stops button and then press press “What can I say?”...
  • Page 244 MULTIMEDIA GUIDANCE VIEW 3 — Route Bar About Guidance View The Route Bar is shown when you have planned a route. The Route Bar contains arrival The guidance view is used to guide you along information, such as the estimated time of the route to your destination.
  • Page 245 MULTIMEDIA NOTE: As you approach an exit or junction, the lane you MAP VIEW If you drive more than 3 mph (5 km/h) over the need is shown on the screen and in the About Map View speed limit, the Speed Panel turns red. If you instruction panel.
  • Page 246 MULTIMEDIA 1. Back Button 4. Selected Location VOICES About Voices Press this button to return to an overview of Press and hold to select a location on the your whole route. Or, if no route is planned, map. Select the Pop-up Menu button to Your navigation system uses sound for some or show options for the location, or select the pressing this button moves the map to put...
  • Page 247 MULTIMEDIA Read Street Names Out Loud (if equipped): Switch To Night Colors When Dark: Select Switch Between Distance And Time Automat-    Use this setting to control whether street this setting to make your system automati- ically: Select this setting to control the auto- names are read out loud as part of navigation cally switch to night colors when it gets dark.
  • Page 248 MULTIMEDIA Automatic Zoom Ask Me So I Can Choose Sounds And Warnings  You can choose whether you would like the Select this setting to control the full screen Select this setting to change the following preview when you approach highway exits. navigation system to allow you to pick the sounds and warnings: route to the destination.
  • Page 249 MULTIMEDIA System Using POIs To Plan A Route 3. If a route is already planned, you can add the location to your current route. To plan a Select this setting to reset all other settings. When you plan a route, you can use a POI for the route to this destination, press the Drive Selecting “Reset”...
  • Page 250 MULTIMEDIA MY PLACES 3. Press the Drive button to begin navigation 3. To select a location, do one of the following: to this destination. About My Places Zoom in on the map at the location you  want to select. Press and hold to select My Places provides an easy way to NOTE: the location, then press the add location...
  • Page 251 MULTIMEDIA 4. Press “Add to My Places”. 4. The map view will show the location. Press Deleting A Location From My Places the pop-up menu button. Deleting A Recent Destination From My Places 5. Press “Add to My Places”. 1. In the Main Menu, select “My Places”. 6.
  • Page 252 MULTIMEDIA GETTING HELP Any changes in GPS availability and accuracy, or This Document in environmental conditions, may impact the About Getting Help Great care was taken in preparing this operation of this navigation system. TomTom® document. Constant product development may Press the Help button in the Main does not accept any liability for the availability mean that some information is not entirely up to...

  • Page 253: Steering Wheel Audio Controls

    MULTIMEDIA © 2021 TomTom®. All rights reserved. This Linotype, Frutiger and Univers are trademarks Pushing the Voice Recognition (VR) button material is proprietary and the subject of of Linotype GmbH registered in the U.S. Patent below the volume controls will begin your voice copyright protection and/or database rights and Trademark Office and may be registered in command functions.

  • Page 254: Player Operation

    MULTIMEDIA LAYER PERATION Pushing the switch up once will go to the next track on the Player. Pushing the switch down once will go to the beginning of the current track or to the beginning of the previous track if it is within one second after the current track begins to play.

  • Page 255: Ram Telematics - If Equipped

     with your VINs. A vehicle name is optional This device complies with Part 15, 22, 24, and Ram Telematics is designed to help improve and can be added later. Follow online instruc- 27 of the FCC and Industry Canada safety, efficiency, and productivity.

  • Page 256: Radio Operation And Mobile Phones

    MULTIMEDIA RADIO OPERATION AND MOBILE PHONES The internal wireless radio operates within The following regulatory statement applies to all guidelines found in radio frequency safety Radio Frequency (RF) devices equipped in this Under certain conditions, the mobile phone standards and recommendations, which reflect vehicle: being on in your vehicle can cause erratic or the consensus of the scientific community.

  • Page 257: Uconnect Voice Recognition

    MULTIMEDIA UCONNECT VOICE RECOGNITION Le présent appareil est conforme aux CNR NOTE: d`Innovation, Science and Economic This equipment has been tested and found to  Development applicables aux appareils radio NTRODUCING CONNECT comply with the limits for a Class B digital exempts de licence.

  • Page 258: Basic Voice Commands

    MULTIMEDIA 5. You can interrupt the help message or ASIC OICE OMMANDS ADIO system prompts by pushing the VR or the The basic Voice Commands below can be given Use your voice to quickly get to the AM, FM, or Phone button and saying a Voice at any point while using your Uconnect system.

  • Page 259: Phone

    MULTIMEDIA Push the VR button on the steering wheel. After TIP: HONE the beep, say one of the following commands When providing a Voice Command, push the VR Making and answering hands-free phone calls and follow the prompts to switch your media button or Phone button (if enabled) and say is easy with Uconnect.

  • Page 260: General Information

    MULTIMEDIA TIP: ENERAL NFORMATION PRE-DEFINED VOICE TEXT REPLY Your mobile phone must have the full imple- RESPONSES The following regulatory statement applies to all mentation of the Message Access Profile (MAP) Radio Frequency (RF) devices equipped in this Stuck in to take advantage of this feature.

  • Page 261: Additional Information

    MULTIMEDIA Le présent appareil est conforme aux CNR La operación de este equipo está sujeta a las DDITIONAL NFORMATION d`Innovation, Science and Economic siguientes dos condiciones: © 2021 FCA US LLC. All rights reserved. Mopar Development applicables aux appareils radio 1.

  • Page 262: Customer Assistance

    CUSTOMER ASSISTANCE SUGGESTIONS FOR OBTAINING SERVICE At many authorized dealers, you may obtain a This is why you should always talk to an rental vehicle at a minimal daily charge. If you authorized dealer service manager first. Most FOR YOUR VEHICLE need a rental, it is advisable to make these matters can be resolved with this process.

  • Page 263: Fca Us Llc Customer Center

    CUSTOMER ASSISTANCE FCA US LLC C US V USTOMER ENTER UERTO IRGIN SLANDS ERVICE ONTRACT P.O. Box 21–8004 FCA Caribbean LLC You may have purchased a service contract for a vehicle to help protect you from the high cost Auburn Hills, MI 48321–8004 P.O.

  • Page 264: Warranty Information

    CUSTOMER ASSISTANCE WARRANTY INFORMATION We appreciate that you have made a major If NHTSA receives similar complaints, it investment when you purchased the vehicle. An may open an investigation, and if it finds See the Warranty Information for the terms and authorized dealer has also made a major that a safety defect exists in a group of provisions of FCA US LLC warranties applicable...

  • Page 265: In Canada

    CUSTOMER ASSISTANCE Service Manuals Owner's Manuals ANADA These comprehensive Service Manuals provide These Owner's Manuals have been prepared If you believe that your vehicle has a the information that students and professional with the assistance of service and engineering safety defect, you should contact the technicians need in diagnosing/ specialists to acquaint you with specific FCA US Customer Service Department...
  • Page 266 INDEX Alarm ....173 ........14 ........... 51 Adding Engine Coolant (Antifreeze) Security Alarm Battery ........165 .........51 Adding Washing Fluid Alarm System Charging System Light ..........204 ..........14 ....10 Additives, Fuel Security Alarm Keyless Key Fob Replacement ............. 79 ............94 Air Bag Alterations/Modifications Belts, Seat ........
  • Page 267 Cleaning Camera, Rear ..........113 Wheels ............. 193 Dealer Service ..........166 Capacities, Fluid ..........207 Climate Control ..........32 Defroster, Windshield ........94 Caps, Filler Manual ............32 Diagnostic System, Onboard ......58 Fuel ............115 Rear .............35 Dimmer Control Switch ........30 Oil (Engine) ..........164 Cold Weather Operation ........96 Dimmer Switch Power Steering...
  • Page 268 ............204 ......... 156 Emergency, In Case Of Ethanol Freeing A Stuck Vehicle ......156 ......93 ............... 203 Freeing Vehicle When Stuck Exhaust Gas Cautions Fuel ..........139 ........93 ........... 204 Jacking Exhaust System Additives ..........152 ...........26 ........... 204 Jump Starting Exterior Lights Clean Air ...
  • Page 269 Inside Rearview Mirror ........24 Hazard Instrument Cluster ........44 Lane Change Assist ..........28 Driving Through Flowing, Rising, Display ............46 Lap/Shoulder Belts ..........71 Or Shallow Standing Water ....126 Instrument Panel Lens Cleaning ....200 Latches ............95 Hazard Warning Flashers ......128 Interior And Instrument Lights ......28 Hood ............39...
  • Page 270 ....66 ........53 Tire Pressure Monitoring (TPMS) Modifications/Alterations Pressure Warning Light ........... 63 ............8 ......166 Traction Control Vehicle Recommendation ........26 ......66 ........... 167 Turn Signals Monitor, Tire Pressure System Synthetic ..........262 ........... 167 Warning Instrument Cluster Mopar Parts Viscosity ........
  • Page 271 Seat Belts Maintenance ........ 200 Radial Ply Tires ..........188 Safety Checks Inside Vehicle ......94 Seats ..............17 Radiator Cap (Coolant Pressure Cap) ....174 Safety Checks Outside Vehicle ......95 Adjustment ..........17 Radio Frequency Safety Defects, Reporting ......262 Heated ............21 General Information ........254 Safety Information, Tire ........
  • Page 272 ............23 ........... 183 ........124 Steering Load Capacity Cooling System Tips ..........23 ..53 ............. 120 Column Lock Pressure Monitoring System (TPMS) Hitches ..........106 ......... 196 ......121 Power Quality Grading Minimum Requirements ......251 ............188 ............123 Steering Wheel Audio Controls Radial Tips...
  • Page 273 Wheel And Wheel Tire Care ......193 Vehicle Certification Label ......116 Warning Lights (Instrument Wheel And Wheel Tire Trim ......193 Vehicle Identification Number (VIN) ....202 Cluster Descriptions) ........55 Wind Buffeting ..........39 Vehicle Loading ......116 Warnings And Cautions ........8 Window Fogging ..........36 Vehicle Modifications/Alterations...
  • Page 275 It is always the driver’s responsibility to comply with all local laws. This Owner’s Manual has been prepared to help you get acquainted with your new Ram brand vehicle and to provide a convenient reference for common questions.
  • Page 276 ©2021 FCA US LLC. All Rights Reserved. Tous droits réservés. Ram is a registered trademark of FCA US LLC. Ram est une marque déposée de FCA US LLC. App Store is a registered trademark of Apple Inc. Google Play Store is a registered trademark of Google.

Table of Contents