RAM Promaster 2016 User Manual page 14

Table of Contents

Advertisement

G E T T I N G S T A R T E D
Fuel Cut Off Switch
Your vehicle is equipped with a Fuel Cut Off safety switch. In the event of an
accident, if the communication network remains intact, and the power remains
intact, depending on the nature of the event, the Fuel Cut Off Switch may perform the
following functions:
• Cut off fuel to the engine and turn off the engine.
Flash hazard lights as long as the battery has power or until the hazard light
button is pressed. The hazard lights can be deactivated by pressing the hazard
light button.
• Turn on the interior lights, which remain on as long as the battery has power.
• Unlock the power door locks.
NOTE:
After an accident, remember to cycle the ignition to the STOP (OFF/LOCK) position
and remove the key from the ignition switch to avoid draining the battery. Carefully
check the vehicle for fuel leaks in the engine compartment and on the ground near
the engine compartment and fuel tank before resetting the system and starting the
engine. If there are no fuel leaks or damage to the vehicle electrical devices (e.g.
headlights) after an accident, reset the Fuel Cut Off Switch by following the
procedure described below.
Fuel Cut Off Switch Reset Procedure
• In order to reset the Fuel Cut Off Switch after an event push the "A" Button
located underneath the front passenger seat knee impact bolster.
If, after an accident, you smell fuel or see leaks from the fuel system, do not reset
the Fuel Cut Off Switch to avoid the risk of fire.
Before reactivating the fuel cut off switch, carefully check for fuel leaks or damage
to vehicle electrical devices (e.g. headlights).
12
WARNING!
Fuel Cut Off Switch

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents