RAM Promaster 2016 User Manual page 104

Table of Contents

Advertisement

W H A T T O D O I N E M E R G E N C I E S
• Take care to avoid the radiator cooling fan whenever the hood is raised. It can
start anytime the ignition switch is ON. You can be injured by moving fan
blades.
• Remove any metal jewelry such as rings, watch bands and bracelets that could
make an inadvertent electrical contact. You could be seriously injured.
• Batteries contain sulfuric acid that can burn your skin or eyes and generate
hydrogen gas which is flammable and explosive. Keep open flames or sparks
away from the battery.
1. Set the parking brake, shift the automatic transmission into PARK and turn the
ignition to the OFF position.
2. Turn off the heater, radio, and all unnecessary electrical accessories.
3. If using another vehicle to jump-start the battery, park the vehicle within the
jumper cables reach, set the parking brake and make sure the ignition is OFF.
Do not allow vehicles to touch each other as this could establish a ground
connection and personal injury could result.
Jump-Starting Procedure
Failure to follow this jump-starting procedure could result in personal injury or
property damage due to battery explosion.
Failure to follow these procedures could result in damage to the charging system
of the booster vehicle or the discharged vehicle.
Connecting The Jumper Cables
1. Connect the positive (+) end of the jumper cable to the remote positive (+) post
of the discharged vehicle.
NOTE:
The remote positive (+) post is located in the engine compartment on the driver's
side under the cover of the Front Power Distribution Center.
2. Connect the opposite end of the positive (+) jumper cable to the positive (+) post
of the booster battery.
102
WARNING!
WARNING!
WARNING!
CAUTION!

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents