Jump-Starting Procedures - RAM Promaster 2016 User Manual

W H A T T O D O I N E M E R G E N C I E S
4. Position the tire vertically and lay the mounted adapter on the inner part of the
rim. Using the supplied bolts, fasten the wheel to the adapter using the bolt
install wrench. Tighten the bolts with the wrench extension and wrench handle.
5. Follow the steps above for proper spare
tire stowage.
Wheel Covers
Use a back-and-forth motion to remove the hub cap. Do not use a twisting motion
when removing the hub cap, damage to the hub cap finish may occur.
The wheel covers on the vehicle are held in place by the wheel lug bolts and can be
removed after the wheel lug bolts are taken off.

JUMP-STARTING PROCEDURES

If your vehicle has a discharged battery it can be jump-started using a set of jumper
cables and a battery in another vehicle or by using a portable battery booster pack.
Jump-starting can be dangerous if done improperly so please follow the procedures
in this section carefully.
NOTE:
When using a portable battery booster pack follow the manufacturer's operating
instructions and precautions.
100
Wheel/Bolts Attaching To Mounting Bracket
CAUTION!