Brake Adjustment Tandem Without Abs - Atlas Copco XAMS 1150 CD7 T3 APP Instruction Manual

BRAKE ADJUSTMENT TANDEM WITHOUT ABS

"C"
"1"
"12"
"6"
(3)
"C"
"Z"
(1)
(2)
(2)
"Z"
- 84 -
Adjusting the linkage
 The parking brake is adjusted by using the
turnbuckle (1). Adjust till there is almost no play
in the linkage is (max. 3 mm is allowed). Take
care that of both thread ends at least two complete
turns of the thread are visible in the inner part of
the turnbuckle.
 Apply the parking brake lever (3) several times by
hand with a force of 200 to 300 N and put it back
into the -not engaged- tooth "1"-position. Adjust
the turnbuckle (1) as described above.
Tighten all lock nuts (2)
(Torque: M12=40 Nm, M10=24 Nm).
Testing the parking brake
 For testing the parking brake, apply the parking
brake lever. The nominal brake power must be
reached between the 6th and 12th tooth of the
toothed segment ("C").