Atlas Copco XAMS 1150 CD7 T3 APP Instruction Manual page 52

Set for Remote Operation
Press the Settings View button
 scroll to 1000 GENERAL SETTINGS
 press Enter
 scroll to 1100 OPERATION MODE COMMAND
 Enter the OPERATION MODE COMMAND
menu
 Enter the SETTINGS parameter
 scroll to REMOTE
 press Enter.
Now the controller can only be started/stopped/
loaded by means of Remote Start/Stop/Load digital
inputs.
The start/stop/load buttons at the control panel will be
inactive, and if pressed the display will show:
0.0
To deactivate Remote Operation:
 Press the Settings View button
 scroll to 1000 GENERAL SETTINGS
 press Enter
 scroll to 1100 OPERATION MODE COMMAND
 press Enter
 go to parameter SETTINGS
 press Enter
 scroll to LOCAL
 press Enter.
Now press Back until you are in the Main View (or
the menu you require).
The Start/Stop/Load buttons at the control panel are
active.
- 52 -