Step
Enable command
4.
accounting.
Configuration example
Network requirements
As shown in
Configure the device to send commands executed by users to the HWTACACS server to monitor
and control user operations on the device.
Figure 18 Network diagram
Configuration procedure
# Enable the Telnet server.
<Device> system-view
[Device] telnet server enable
# Enable command accounting for user line AUX 0.
[Device] line aux 0
[Device-line-aux0] command accounting
[Device-line-aux0] quit
# Enable command accounting for user lines VTY 0 through VTY 63.
[Device] line vty 0 63
[Device-line-vty0-63] command accounting
Command
command accounting
Figure
18, users need to log in to the device to manage the device.
Remarks
By default, command accounting is
disabled. The accounting server does not
record the commands executed by users.
If the command accounting command is
configured in user line class view,
command accounting is enabled on all
user lines in the class. You cannot
configure the undo command
accounting command in the view of a
user line in the class.
75