Feature Rollback Example - HPE FlexFabric 5940 Series Configuration Manual

This operation will take several minutes, please wait...........................Done.

Feature rollback example

Rollback requirement
As shown in
from T0001015 to T0001016. However, the software change has not been committed.
Roll back the Feature1 feature from T0001016 to T0001015.
Rollback procedure
# Display active software images.
<Sysname> display install active
Active packages on slot 1:
flash:/boot-t0001015.bin
flash:/system-t0001015.bin
flash:/feature1-t0001016.bin
Active packages on slot 2:
flash:/boot-t0001015.bin
flash:/system-t0001015.bin
flash:/feature1-t0001016.bin
# Display available rollback points.
<Sysname> display install rollback
Install rollback information 1 on slot 1:
Updating from flash:/feature1-t0001015.bin
Install rollback information 2 on slot 2:
Updating from flash:/feature1-t0001015.bin
# Roll back the feature to T0001015.
<Sysname> install rollback to original
This operation might take several minutes, please wait...Done.
# Verify that the IRF members are running the old feature image.
<Sysname> display install active
Active packages on slot 1:
flash:/boot-t0001015.bin
flash:/system-t0001015.bin
flash:/feature1-t0001015.bin
Active packages on slot 2:
flash:/boot-t0001015.bin
flash:/system-t0001015.bin
flash:/feature1-t0001015.bin
# Commit the software changes.
<Sysname> install commit
This operation will take several minutes, please wait...........................Done.
Figure 30, the IRF fabric has two members. The Feature1 feature has been upgraded
to flash:/feature1-t0001016.bin.
to flash:/feature1-t0001016.bin.
139