Changing To Another User Account; Maintaining And Troubleshooting The Ftp Connection - HPE FlexFabric 5940 Series Configuration Manual

Task
Add the content of a file on the
FTP client to a file on the FTP
server.
Specify the retransmit marker.
Update the local file.
Get the missing part of a file.
Rename the file.

Changing to another user account

After you log in to the FTP server, you can initiate an FTP authentication to change to a new account.
By changing to a new account, you can get a different privilege without re-establishing the FTP
connection.
For successful account change, you must enter the new username and password correctly. A wrong
username or password can cause the FTP connection to be disconnected.
To change to another user account, execute the following command in user view:
Task
Initiate an FTP authentication on the current FTP connection.

Maintaining and troubleshooting the FTP connection

Perform the following tasks in FTP client view:
Task
Display FTP commands on the FTP
server.
Display FTP commands help
information on the FTP server.
Display FTP server status.
Display detailed information about a
directory or file on the FTP server.
Display FTP connection status.
Display the system information of the
FTP server.
Enable or disable FTP operation
information display.
Enable or disable FTP client
debugging.
Clear the reply information in the buffer.
Command
append localfile [ remotefile ]
restart marker
newer remotefile
reget remotefile [ localfile ]
rename [ oldfilename [ newfilename ] ]
Command
rhelp
rhelp protocol-command
rstatus
rstatus remotefile
status
system
verbose
debug
reset
83
Remarks
N/A
Use this command together
with the put, get, or append
command.
N/A
N/A
N/A
Command
user username [ password ]
Remarks
N/A
N/A
N/A
N/A
N/A
N/A
By default, this function is enabled.
By default, FTP client debugging is
disabled.
N/A